Manual Pioneer GM-6500F (page 4 of 96) (English, German, Dutch, French, Italian, Spanish)

454996

Zoom out

Zoom in

1/96

What’s what

Front side

Rear side

To adjust the switch, use a flathead screwdri-

ver if needed.

1 LPF (low-pass filter)/HPF (high-pass fil-

ter) select switch

Switch the settings based on the connected

speaker.

! When the Subwoofer is connected:

Select LPF. This eliminates high range

frequency and outputs low range fre-

quency.

! When the full range speaker is con-

nected:

Select HPF or OFF. HPF eliminates low

range frequency and output high range

frequency. OFF outputs the entire fre-

quency range.

2 GAIN (gain) control

Adjusting gain controls CHANNEL A (chan-

nel A) and CHANNEL B (channel B) helps

align the car stereo output to the Pioneer

amplifier. Default setting is the NORMAL

position.

If output remains low, even when the car

stereo volume is turned up, turn controls to

lower level. If distortion occurs when the car

stereo volume is turned up, turn these con-

trols to higher level.

! If using only one input plug, set the gain

controls for speaker outputs A and B to

the same position.

! For use with an RCA equipped car stereo

(standard output of 500 mV), set to the

NORMAL position. For use with an RCA

equipped Pioneer car stereo, with max.

output of 4 V or more, adjust level to

match that of the car stereo output.

3 INPUT SELECT (input select) switch

Select 2CH for two-channel input and 4CH

for four–channel input.

! You can select input select only for con-

nections when using the RCA input jack.

For connections when using the speaker

input wire, 4CH will be used automati-

cally no matter which switch setting is

selected.

4 FREQ (cut off frequency) control

Cut off frequency selectable from 40 Hz to

500 Hz if the LPF/HPF select switch is set to

LPF or HPF.

! You can select cut off frequency only for

CHANNEL B.

5 Power indicator

The power indicator lights up to indicate

power ON.

Setting gain properly

! Protective function included to prevent

malfunction of the unit and/or speakers

due to excessive output, improper use or

improper connection.

! When outputting high volume sound etc.,

this function cuts off the output for a few

seconds as a normal function, but output

is restored when the volume of the head

unit is turned down.

! A cut in sound output may indicate impro-

per setting of the gain control. To ensure

continuous sound output with the head

unit at a high volume, set amplifier gain

control to a level appropriate for the preout

maximum output level of the head unit, so

that volume can remain unchanged and to

control excess output.

Section

Setting the unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer GM-6500F in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer GM-6500F Manual

Product: