455148
154
Zoom out
Zoom in
Previous page
1/162
Next page
18
154
Du
Meldingen in het voorpaneel-display
De onderstaande tabel toont een lijst met foutmeldingen die bij het gebruik van de recorder
kunnen verschijnen en de betekenis van deze meldingen.
• There is no DV input or the input
signal is unrecordable.
Er wordt geen signaal waargenomen bij de DV IN
aansluiting. Deze melding kan verschijnen als er
een blanco gedeelte van de DV-band in de
aangesloten camcorder wordt afgespeeld.
• No DV camcorder connected. De camcorder is niet juist aangesloten of de
camcorder is uitgeschakeld.
• You cannot connect more than one
DV camcorder at a time.
De DV-aansluiting van deze recorder kan niet op
meer dan één camcorder worden aangesloten.
• Cannot operate the DV camcorder. Deze recorder kan de DV-camcorder niet bedienen.
Schakel de camcorder uit en daarna weer in en
kijk of bediening dan wel mogelijk is.
• Could not operate the DV camcorder. Deze recorder was niet in staat om de DV-
camcorder te bedienen.
• The DV camcorder is not set for
playback. Please select playback mode
on the DV camcorder.
De camcorder staat in de camera-gebruiksstand.
Zet de camcorder in de weergave-gebruiksstand.
• The printer is not ready or is not
connected. Please check the printer.
Deze melding verschijnt als er geen communicatie
met de printer mogelijk is. Zie het hoofdstuk
Problemen oplossen
als u de oorzaak niet weet.
• Printing has been cancelled
because ...
Deze melding verschijnt als er een printerfout
tijdens het afdrukken optreedt. Nadat u de printer
hebt gecontroleerd op de oorzaak van de fout, sluit
u de printer weer aan en begint vervolgens opnieuw
met de afdruktaak, of u selecteert “Yes” om het
afdrukken te hervatten (selecteer “No” om de
afdruktaak te annuleren). Raadpleeg ook de
handleiding van de printer voor mogelijke oorzaken
van printerfouten.
Melding Betekenis/Maatregel
• E01 Het is mogelijk dat de vaste schijf beschadigd of defect is. Neem contact op met uw
dichtstbijzijnde officiële Pioneer servicecentrum of uw dealer om het apparaat te
laten repareren.
• E02
Aangezien de informatie op de vaste schijf niet juist kan worden gelezen, kunnen er
geen nieuwe opnamen worden gemaakt. Wanneer de vaste schijf opnieuw
geïnitialiseerd wordt (pagina 123), is het mogelijk dat er weer opnamen op gemaakt
kunnen worden. Bij het initialiseren van de vaste schijf worden alle opnamen, inclusief
de beveiligde bestanden, gewist.
Melding Betekenis/Maatregel
DVRLX61_WY_DU.book Page 154 Thursday, February 7, 2008 2:35 PM
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVD-LX61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVD-LX61 in the language / languages: Dutch as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info