651674
3
Zoom out
Zoom in
Previous page
1/116
Next page
3
CAUTION
The /I STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
Thank you for buying this Pioneer
product.
Please read through these operating instructions so that
you will know how to operate your model properly. After
you have finished reading the instructions, put them in a
safe place for future reference.
Contents
01 Before you start
What’s in the box. . . . . . . . . . . . . . . . . . . . . . . . . .4
Loading the batteries in the remote control . . . . . .4
Using the remote control. . . . . . . . . . . . . . . . . . . . .4
Installing the amplifier. . . . . . . . . . . . . . . . . . . . . .4
02 Connecting up
Making cable connections. . . . . . . . . . . . . . . . . . .5
About “Bi-wiring” . . . . . . . . . . . . . . . . . . . . . . . . . .5
Connecting speaker cables . . . . . . . . . . . . . . . . . .6
Connecting audio cables . . . . . . . . . . . . . . . . . . . .6
Connecting to the balanced input terminals (A-70DA
only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Digital audio input connections. . . . . . . . . . . . . . .7
Using a USB cable to connect to a computer . . . .7
Using centralized control with other Pioneer
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
03 Controls and displays
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . .10
04 Operation
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Set the power to Standby. . . . . . . . . . . . . . . . . . . .11
When using the unit as a power amplifier . . . . . . .11
Playing music from a digital audio component . . .11
Making an audio recording . . . . . . . . . . . . . . . . .12
To set for automatic standby status (Auto Power
Down) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Restoring all the settings to the factory default
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
05 Using the USB DAC function
Install the driver. . . . . . . . . . . . . . . . . . . . . . . . . .13
Playing music from a computer. . . . . . . . . . . . . .13
06 Additional information
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . .14
About the USB DAC function . . . . . . . . . . . . . . . .15
Cleaning the unit . . . . . . . . . . . . . . . . . . . . . . . . .15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .16
A70_SYXE8_0728.book 3 ページ 2015年7月28日 火曜日 午後3時54分
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer A-70DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer A-70DA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 23,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info