643479
60
Zoom out
Zoom in
Previous page
1/72
Next page
DT2010092-03
7.5 CLEANING THE FLUE SYSTEM
Fig. 69
Soot and Flyash: formation and need for removal.
The products of combustion will contain small particles of yash. The
yash will collect in the exhaust venting system and restrict the ow of
the ue gases. Incomplete combustion, such as occurs during startup,
shutdown, or incorrect operation of the room heater will lead to some
soot formation which will collect in the exhaust venting system. The
exhaust venting system should be inspected at least once every two
months during the heating season to determine if cleaning is necessary.
Until you have got reasonably used to the operating conditions of
the stove, we recommend that this maintenance be carried out on a
monthly basis.
Remove the plug from the Tee and clean the pipes.
Do not use a metal trush to clean this vent. Such a brush may scratch
the vent liner and promote corrosion. Do not use chemical cleaners in
this vent system. They do not eliminate need for manual cleaning and
may be corrosive to vent materials.
If necessary, particularly on the rst few occasions, we recommend
calling in a qualied technician.
DT2010059-03
7.6 CLEANING THE CERAMIC CLADDING
The ceramic cladding must rst be cleaned with a soft dry cloth before using any detergent (even mild detergent).
Products are available on the market which are suitable for cleaning ceramics as well as concentrated products for cleaning porcelain. These will
remove oil, ink, coffee and wine stains, etc.
d Never soak the ceramic cladding or clean it with cold water when it is still hot as the thermal shock could cause it to crack.
DT2010061-03
7.7 CLEANING THE ENAMELLED METAL PARTS
DT2010062-05
7.8 CLEANING THE GLASS (DAILY)
When cleaning the enamelled metal parts of the product use a soft cloth moistened with water
d Never clean metallic parts using alcohol, solvents, petroleum-based products, acetones or other degreasing or abrasive substances.
In the event of such substances being used, the manufacturer will not be responsible for any damage caused.
Discolouration of metallic parts may be the result of misuse.
a The glass should be cleaned when cold using ammonia-based degreasing agents and not corrosive substances such as solvents.
Although it is likely that tar will build up on the glass during the lighting stage, it will burn off with the stove in full operation.
If, however, the tar is left to build up over a long period it will require more effort to remove.
We therefore recommend that the glass be cleaned daily before lighting the stove.
d Do not use any material that could scratch or spoil the glass, as scratches may develop into cracks or breaks.
H07031310 / DT2002112 – 00
60
English
DT2031151-00
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P958 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P958 C in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info