737032
1
Zoom out
Zoom in
Previous page
1/3
Next page
Ph Sf Cpny r eac n s gurte
FIRST OPENING ON FACTORY DEFAULT CODE
Factory code is 1 2 3 4 5 6
1. Touch the screen, to activate (1 bleep and screen illuminates).
2. Enter the user code (1st time usage 123456).
3. Touch OPEN, a melodic tone will sound and the display will
show OPEnd.
4. Turn handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. If an incorrect code is entered, Error will appear in the display
panel and a short warning tone will sound.
II. If a wrong code is entered 5 times the lock will cease to oper-
ate for 5 minutes. During which a warning tone will sound and
the display will indicate deLAY.
SETTING A NEW USER CODE
Set a new code with the door open and test the new code before
closing the door.
1. Touch the screen to activate
2. Touch ENTER
3. Type in the present code
4. Touch ENTER
5. Type in the new 4 – 16 digit code
6. Touch ENTER, a melodic tone will sound and the display will
show EntErd
For example:
If the present code is 1 2 3 4 5 6 and a new four digit code is
decided as 4 2 4 2 enter the following –
ENTER > 1 2 3 4 5 6 > ENTER > 4 2 4 2 > ENTER
EntErd will show in the display and a short tone will sound to
conrm the change to 4 2 4 2
INTRODUCING A FINGERPRINT
Open the door using the user code. Keep the door open while
carrying out this process.
1. Press the M button on the back of door, the screen will be
activated
2. Press 3 on the screen
3. Press ENTER
4. Enter the user code and press ENTER
5. Scan in the ngerprint twice
consecutively, by placing the
nger on the sensor. The screen
will show EntErd a melody will
sound.
NOTE: Check the nger print had
been set correctly following -
How to open with a ngerprint.
A total of 128 nger prints can be
introduced into the lock.
HOW TO OPEN WITH A FINGERPRINT
1. Touch the screen to activate
2. Scan the ngerprint on the sensor, the screen will show
OPEnd and a melody will sound.
3. Turn the handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. If an incorrect ngerprint is scanned, ErrOr will appear in the
display and a short warning tone will sound.
II. If a wrong ngerprint is scanned 5 times the lock will cease to
operate for 5 minutes. During which a warning tone will sound
and the display will indicate deLAY.
V1 JUL 2018
Battery Case
Hold the upper part and turn it counter-clockwise to
disassemble (1,5V AA Alkaline 4 pcs)
Upper part Lower part
Reset Button
Upper
part
Lower
part
Securing
Hole
Memory Button
Door back or Top drawer back
Put Finger-print twice
While red lamp flickering,
put user’s finger on sensor.
1
2
After Bi- sound,
repeat the above
1
SS1160F OPERATING INSTRUCTIONS
& GUARANTEE REGISTRATION
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phoenix SS1164 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix SS1164 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info