The original Master code is 011223, when changing any code please do this with the door in the open position.
2. Opening your safe for the fist time / Override key
Remove the grey plastic plug at the bottom of the keypad (1) insert one of your emergency keys into the lock, turn anticlockwise. Whilst holding the key in
position, turn the handle to open your safe.
3. Batteries
The safe requires 4 x AA alkaline batteries (Not supplied). Insert these into the battery compartment on the back of the door. This can be accessed by
removing the screw on the panel, using the Allen key provided. When the batteries are low a red indicator light will illuminate and they should be changed
as soon as possible.
4. Closing the safe/ setting personal code
Shut the safe door and enter a 4 digit code followed by #, now turn the handle into the locked position. Your code is now stored.
5. Opening the safe using the personal code
To unlock- input your user or master code and press # to confirm. When the green light is on, turn the handle (2) anticlockwise and open the door.
6. Changing the Master code
Press ** yellow warning light is on. Input the current master code (011223) and press #. Input your new code and press #, input new code again and press #
to confirm. The yellow warning light goes off and your new code is set. If you get 5 beeps your code is not set and you will have to start again.
7. Return the master code to the original setting
To complete this you will need to remove the lock casing once this is done press the black button on the PCB for at least 3 seconds, the green light will
blink, then the green, red, yellow light will illuminate and turn off. Your safe has now returned to the original master code of 011223.
8. Installation
Use the two 6mm bolts to fix your safe to a suitable wall/floor.
U
N
L
O
C
K
L
O
C
K
OPEN
LOW BATTERY
WARNING
1 ABC2 DEF3 GHI
4 JKL5 MNO6 PQR
7 STU8 VWX9 YZ
*
0
#
1. Key Override
2. Handle
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Phoenix SS0300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Phoenix SS0300 in the language / languages: English as an attachment in your email.
The manual is 0,1 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
