492021
5
Zoom out
Zoom in
Previous page
1/12
Next page
© 2011 Phoenix Gold • www.phoenixgold.com
Amplier Owners Manual
INPUT
RR
RL
FR
FL
FREQ
40Hz 400Hz
X OVER
LPF
FLAT
HPF
BASSBOOST
0d B 18dB
SENS
MIN MAX
SENS
MIN MAX
FREQ
40Hz 400Hz
BASSBOOST
0d B 18dB
X OVER
HPF
FLAT
LPF
POWER
FL
GROUND REMOTE + 12V
FUSE
25A 25A
FR
RL RR
+ 12VR
GROUND REMOTE + 12V
FUSE
30A30A
SPEAKER
GROU N D + 12VR
POWER
SENS
MIN MAX
BASS
0d B 18dB
X-OVER
FREQ.
30Hz 30 0Hz
REMOTE
PROTECT
SUBSONIC
10Hz 55Hz
L
R
INPUT
PROTECT
POWER
REMOTE
SUB INPUT
R
MIN MAX
MIN MAX
SENS
SENS BASS BOOS T
0d B 18dB
HPF
15Hz 25 0Hz
HPF
15Hz 25 0Hz MIN MAX
SENS
30Hz
LP F
300Hz
GROUND REMOTE + 12V
FUSE
30A
FL
30A
SUB.
SUB.
INPUT
RR
RL
FR
FL
SUB INPUT
L
S UB FRONT
FRONT REAR
FR
RL RR
GROU N D + 12VR
GROU N D
+12V
This must be connected to the fused positive terminal (+12V) of the cars
battery. The fuse must be located within 18 inches of the battery.
REMOTE
This must be connected to switched +12V, usually a trigger wire coming
from the head unit or ignition.
GROUND
This must be connected to the negative terminal of the car’s battery or
bolted to a clean, unpainted part of the chassis of the vehicle.
SPEAKER OUTPUTS
Used to connect the amplier to speakers. Front and Rear Channel minimum
impedance is 4 ohm bridged or 2 ohm stereo. Subwoofer channel minimum
impedance is 2 ohm. Use Right + and Left - to bridge the front or rear channels,
the subwoofer channel is not bridgeable.
FRONT, REAR AND SUB INPUTS
Connect preamp signal cables from headunit to these inputs. The front
AND rear inputs must be used, if only the front input is used then the rear
speaker outputs will have no output signal. The Sub Input may or may not
be used see SUB INPUT SWITCH for more information.
HPF AND LPF CROSSOVER FREQUENCY
Controls the crossover point for the speaker outputs.
REMOTE LEVEL CONTROL
This port is for connecting the subwoofer remote level control. This allows
up to 20dB of volume adjustment. This is not a bass boost, it controls the
level of the subwoofer channel only.
NOTE: This control is not compatible with the Phoenix Gold LPL44 level
control.
BASS BOOST
Variable bass boost from 0 to +18dB @ 45Hz for the subwoofer channel only.
SENS
Used to reach maximum amplier power with a wide variety of headunits.
SUB INPUT SWITCH
IN: Subwoofer speaker output is fed by the sub Input. If the headunit or
processor has a subwoofer low level output use this setting.
OUT: Subwoofer speaker output is fed by the front input and the sub Input is not
used. If the headunit or processor only has front and rear low level outputs use
this setting.
SD800.5
5 Channel Power Amplifier
NOTE: Visible through the plexiglass cover, a single blue power LED is located in the lower corner of all SD ampliers.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phoenix Gold SD300.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix Gold SD300.1 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info