98158
25
Zoom out
Zoom in
Previous page
1/27
Next page
Switching off the modulator
If you cannot clear picture or sound interference, you can
switch off the built-in modulator.
You should only do this if you have connected the video
recorder to the TV set with a scart cable.
a Switch on the TV set and select the programme number
for the video recorder.
b Make sure that no cassette is in the video recorder.
Press the SYSTEM button for several seconds, until, for
example, M583 appears on the video recorder display.
c Hold the SYSTEM button for 3 seconds , until M583
appears on the video recorder display. Than press the
button CLEAR (CL) until MOFF (modulator off) appears. If
you want to switch the modulator on again, hold the
CLEAR (CL), y button, until M583 (Modulator switched on)
appears on the display.
d To end, press the STANDBY m button.
Selecting the sound track
You can select the sound track you want to record. This is
especially useful if the programme is multilingual.
a Press the SELECT button. The current setting will appear
on the TV screen.
b By pressing the SELECT button several times you can
select from the four possibilities displayed (’STEREO’,
RIGHT’, ’LEFT’, ’MONO’).
DWhile a tape is playing, you can select a fifth
possibility: the ’MIXED’ mode. In this mode you can
play the mono sound of the normal (linear) audio
track together with the sound of the stereo audio
track. You can play casettes that have been dubbed
on another video recorder.
DIf there is no stereo sound recorded on the cassette,
the video recorder will automatically switch to mono
sound.
Using your video recorder remote control
with your TV set
Your video recorder remote control can transmit several
commands to TV sets of different makes.
By using the TV buttons on the panel in the middle of the
control, you can:
Sq increase the TV volume
Sr reduce the TV volume
TV y switch off sound
TV m switch off the TV set
TV q next programme number
TV r previous programme number
a Hold the TV m button and enter the correct remote
control command with the digit buttons 0-9 .
You will find a list of all available remote control
commands on the last page of this manual.
DIf the selected code does not work with your TV set,
or if the make of your TV is not in the list, you can try
out the codes one after the other.
22
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR600 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR600

Philips VR600 User Manual - German - 29 pages

Philips VR600 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info