604620
39
Zoom out
Zoom in
Previous page
1/43
Next page
Service 39
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help
below), follow the steps given here.
1 Switch the device off using the on/off key on the
panel control.
2 Wait at least ten seconds.
3 Switch the device on using the on/off key on the
panel control.
4 If the problem repeats, please contact our technical
customer service or your retailer.
Problems Solutions
The projector cannot be switched on Disconnect and Connect the power supply cable and
try again.
The projector cannot be switched off Disconnect the power supply cable.
No sound check that the speaker is activated (Settings /Sound
setting/Speaker).
Adjust the volume using the / key on the
remote control.
No sound from the external connected device Check the cables to the external device
Set the volume on the external device
Only the original cables from the device manufac-
turer may function
No sound from DVB-T program or external HDMI out-
put device.
Set the audio setting to Multichannel (Raw data) &
Stereo (PCM).
No sound when you connect your computer via HDMI
cable
Check that the sound is activated on the computer.
Video display problem when the source is a 3D signal
from a DVD player.
Check that the 3D mode is activated on the projec-
tor.
If the DVD player is connected to the projector via
HDMI, use any of the HDMI sockets.
Only the initial screen appears and not the image from
the external device
Check if the cables are connected to the right sock-
ets.
Please check that the external device is switched on
Check if the video output of the external device is
switched on.
Check that the HDMI source selected on the user
interface corresponds to HDMI connector where
the external device is connected.
Only the initial screen appears and not the image from
the connected computer
Please check that the VGA-output of the computer
is switched on.
Check if the resolution of the computer is set to
1280*800 (for VGA connection) or 1080P(for HDMI
connection).
Screeneo_User-Manual_HDP16x0_TV_EN_253637294-A.book Page 39 Jeudi, 12. février 2015 10:33 10
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Screeneo HDP1650TV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Screeneo HDP1650TV in the language / languages: English as an attachment in your email.

The manual is 5,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Screeneo HDP1650TV

Philips Screeneo HDP1650TV User Manual - German - 44 pages

Philips Screeneo HDP1650TV User Manual - Dutch - 43 pages

Philips Screeneo HDP1650TV User Manual - French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info