RU 240- page 4
4
SBC RU 240 Instructions for use
INTRODUCTION
Congratulations on your purchase of this Philips Universal remote control. This
remote control is designed for easy operation of most equipment in the home. It
can replace up to 4 remote controls of almost any brand, for televisions (TV),
video recorders (VCR) and satellite receivers (SAT), even if the original remote
control is lost or broken.
The Philips Universal Remote Controls are ready for use with Philips TV, VCR and
SAT equipment. To operate equipment from other brands, you have to set up the
Universal Remote Control by following 3 easy steps. If the brand of your
equipment is known, follow the procedure described in chapter: SETTING UP
BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have
the Universal Remote Control do an automatic code search for your equipment.
See chapter SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram on page 3)
A Indicator LED
B Device buttons
C y Power
D † External / source select
E P+, P- Next / previous programme
TV volume Controls
F TV Volume louder / softer
G c Mute
Even if you're operating the VCR (or SAT), you can directly access the volume
of the TV with these buttons
H Digits 0..9
I -1/2 digits, 10, 1-
J FastText keys / VCR
9 Stop
5 rewind
6 wind
2 play
; pause
K b Teletext on
L I Teletext off
M S Shift button
Depending on your equipment, some buttons may work differently. Check the
manual of your equipment to know which functions it will operate.
NORMAL OPERATION
1. Press a device button to select the device you want to operate
2. Press any of the function buttons to operate that function.
SHIFT KEY FOR EXTRA FUNCTIONS
Some equipment has more functions than are available here. With the SHIFT
button you can operate some extra functions of your equipment.
Press and hold SHIFT followed by pressing another button:
SHIFT - : Change colour,
SHIFT - P+ / P- : Change brightness.
Try the other SHIFT keys to discover other functions of your equipment.
