122354
5
Zoom out
Zoom in
Previous page
1/30
Next page
3. Press y 6 to stop the search.
–The LED stays lit.
Note: if y has been pressed too late,
– Turn on the TV again manually
– Press P - 2 to test previous codes until the TV turns off again
4. Press y 6 to lock the code.
The indicator LED blinks twice to indicate successful set-up.
Notes
Turn on the TV again and press the SBC RU 098's buttons to see if they are
working as expected. Some codes are quite similar. If your TV does not
respond correctly, repeat steps 1 to 4 to find a better code.
Maximum search time is 8 minutes for a TV.
READING OUT THE 5-DIGIT BRAND CODE
After using Autosearch to set up the SBC RU 098, note the code for future use.
1. Press and hold c5 and y 6 at the same time for 3 seconds.
The indicator LED lights up.
2. Press c5.
The LED indicator goes out.
3. Press P + 1:
The indicator starts to blink; Count the number of blinks for the first digit.
Note: if the indicator does not blink, the digit is 0.
4. Press P - 2
The indicator starts to blink; Count the number of blinks for the second
digit.
5. Press 3.
The indicator starts to blink; Count the number of blinks for the third digit.
6. Press 4.
The indicator starts to blink; Count the number of blinks for the fourth
digit.
7. Press c5.
The indicator starts to blink; Count the number of blinks for the fifth digit.
8. Write down the code inside the SBC RU 098's battery lid.
Also available from Philips universal remote controls that fit your needs.
Look for the unique full range of universal remote controls from Philips at a retailer near
you.
RU 410: 1 in 1 Universal Remote Control - digits and teletext
RU 422: 2 in 1 Universal Remote Control for TV and VCR
RU 430: 3 in 1 Universal Remote Control for TV, VCR and SAT-receivers
RU 440: 4 in 1 Universal Remote Control for TV, VCR, SAT-receivers and Audio
RU 455: 4 in 1 Universal Remote Control for TV, VCR, SAT-receivers and a second device,
with backlit keys
RU 460: 6 in 1 Universal Remote Control- Pre-programmed and Learnable
Also available: the SBCLI510 remote control extender set, this system allows you to operate
every IR driven equipment from anywhere in or around the house. You do not have to 'see'
the equipment that you want to control anymore, nor do you have to aim the remote control
on your equipment.
-
+
5
RU 098/00- page 5
Instructions for use
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips sbc ru 098 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips sbc ru 098 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info