492785
5
Zoom out
Zoom in
Previous page
1/19
Next page
5
Philips/Magnavox Components
The DSS remote control can control up to six
different components and is already pre-pro-
grammed for use with newer Philips/
Magnavox audio/video equipment. Unless
you want to change a factory setting,skip the
programming instructions and simply start
using your new remote control.
Programming Other Components
To control component brands other than
Philips/Magnavox,youll need to perform the
following steps to manually program the
DSS with codes listed under Manufacturer’s
Codes on pages 15 through 19.Or as alterna-
tive, you can use the Auto Scan feature, on
page 6,to program your component codes.
The following chart lists the remote controls
component keys and what type of device
each key will control:
Key Programmed To Control
TV TV
VCR VCR, DVD or LD Player
CBL Cable Box
AUD Amplifier,Tuner, Misc.Audio,
or CD Player
DSS Digital Satellite System
CD CD Player,Amplifier,Tuner,or
Misc.Audio
NOTE: If you want the component keys to
control other types of devices, you’ll need to
reassign the component keys. See page 7.
IMPORTANT: Please completely read and
review the following steps before proceeding.We
recommend highlighting the codes (starting on
page 15) for the brands you wish to program or
writing them down in the supplied chart.
Setup Codes For My Components
TV
VCR
CBL
DSS
CD
DVD
AUDIO
LD
OTHER
To Manually Program The Remote Control:
NOTE: To program a TV/VCR Combo, skip
these instructions and follow the steps on the
next page.
1. Manually turn on a component
(e.g.,TV, VCR,etc.) and,if applic-
able,insert media (e.g.,cassette).
2. On the remote con-
trol, press a compo-
nent key once (e.g.,
TV,VCR,CBL,AUD,DSS,or CD).
3. Press and hold SET (approx.
5 seconds) until the red light
blinks twice,then release SET.
4. Enter the first four-digit code for
your brand of component. If
performed correctly, the red
light will blink twice.
5. Aim the remote control at the
component and press POWER
once. It should turn off. If it does
not respond, repeat steps 2 and
3, trying each code for your
brand until you find one that
works. If it still does not work,
try using Auto Scan (on page 6)
to program your component.
6. Repeat steps 1 through 5 for each
component you want to program
into the DSS remote control.
NOTES: Press each key within 10 seconds of
the previous entry. Otherwise, the remote con-
trol will exit the programming mode.
If you press
SET
at any time (except during
step 3), the remote control will exit the pro-
gramming mode without saving your entries.
You will have to start with step 1 to begin pro-
gramming again.
PROGRAMMING YOUR REMOTE CONTROL
REM400 Manual Engl 12/28/99 12:01 PM Page 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips REM400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips REM400 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info