521770
33
Zoom out
Zoom in
Previous page
1/40
Next page
33
Hints & tips
Consulting or modifying
Documents in the waiting queue may have the
following status:
TX—polling transmission
DOC—in deposit
POL—polling reception
in progress—ongoing commands
SMS—SMS transmission
Press M, 62 and OK. Use / to select a
document from the waiting queue and con rm
with OK. Modify the parameters and con rm
with OK.
Immediate transmission
Press M, 61 and OK. Use / to select the
document in the waiting queue and con rm with
Y or OK to immediately perform the selected
fax or SMS transmission.
Cancelling a transmission
Press M, 63 and OK. Use / to select the
document in the waiting queue and con rm with
OK.
Printing a document
Press M, 64 and OK. Use / to select the
document in the waiting queue and con rm with
OK.
Printing the waiting queue
Press M, 65 and OK. A list of the documents
queuing for transmission will be printed.
Lock
You can block access to the keypad for numbers
or to the whole keyboard of your MF-JET 450.
Entering the code
Enter a four-digit code. This code is also used to
cancel the keyboard lock.
1 Press M, 711 and OK.
2 Enter the four-digit interlock code and press
OK.
3 Enter the code one more time and press OK.
v When a code is already registered, the
machine asks you rst to give the old code
before allowing you to modify it.
Locking the keyboard
1 Press M, 712 and OK.
2 Enter the four-digit interlock code (see Enter-
ing the code) and press OK.
3 Use / to select WITH and press OK.
The access code must be entered each time the
machine is used.
v After each operation, the machine locks
automatically. To unlock the keyboard,
enter WITHOUT in step 3.
Locking numbers
You can also just lock the keypad for numbers
with a code. Transmissions are only possible
from numbers included in the directory.
1 Press M, 713 and OK.
2 Enter the four-digit interlock code (see Enter-
ing the code) and press OK.
3 Use / to select only direct. and press
OK.
v After each operation, the machine locks
automatically. To unlock the keyboard,
enter FREE in point 3.
Care and maintenance
Cleaning the machine
Use a soft, uff-free cloth. You can also use a
special cloth for cleaning machines (see Ordering
information). Never use liquid or gaseous clean-
ing agents (sprays, scouring agents, polishes, alco-
hol etc.). Do not allow any moisture to penetrate
inside the device.
Cleaning the scanner glass
1 Open the scanner cover.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips MF-Jet 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips MF-Jet 450 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips MF-Jet 450

Philips MF-Jet 450 User Manual - German - 44 pages

Philips MF-Jet 450 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info