521770
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
Fax
Resolution f%F
To change the resolution, keep pressing f%F
until the desired arrow symbol (d) is highlighted
on the display with §. If none of the three ar-
row symbols is highlighted on the display, the
machine is in standard resolution.
standard—for good quality documents, without
drawings or small details
f—for documents with drawings or small char-
acters
%—for documents with very ne or small
drawings
F—for photos
Contrast O
If the document is too light or too dark, you may
change the contrast. Press O as many times as
necessary to choose the desired contrast. The
current setting is shown on the display.
Receiving faxes
If you have not changed the settings for fax re-
ception, faxes will be automatically received. (For
instructions on how to change the settings for
fax reception see chapter Advanced settings /
Fax settings.)
If there is no more paper in the feeder or if the
cartridge is empty, incoming faxes will be stored
in memory (storage capacity approx. 50 pages).
If the memory is full, no further pages can be
stored and certain functions can no longer be
performed. To empty the memory insert paper
or a cartridge and start printout of the faxes by
pressing Y.
v When a fax message is completely printed
out, it will be deleted from the memory.
If the printing process was interrupted,
all fax messages that have not been com-
pletely printed out will remain stored.
Memory lock
The memory lock stores the documents that
cannot be printed out immediately (see Receiv-
ing faxes) or that are not to be printed out. They
need not be printed as soon as you receive them.
The ; symbol on the display lets you know the
state of the memory lock:
; on—memory lock feature enabled
; flashing—documents are in the memory or
are being received
; off—memory is full or you have disabled au-
tomatic fax reception
To prevent faxes from being printed out by the
wrong person, you can protect access with a
four-digit answer code. Once stored, this code is
required to print fax messages and to activate/de-
activate the memory lock.
Storing an answer code
Press M, 343 and OK. Enter a four-digit
code and press OK.
Activate/deactivate
Press M, 342 and OK. If you have stored an
answer code, enter it and press OK. Use / to
select WITH or WITHOUT and press OK.
Printing messages
Press M, 341 and OK. If you have stored an
answer code, enter it and press OK. Documents
received and stored in the memory are printed
and then deleted from the memory.
Send report
The MF-JET 450 can print a send report every
time you have sent a document. This way you are
given con rmation that your document has been
received.
1 Press M, 231 and OK. Select one of the
following options:
WITH—a report is printed out after every suc-
cessful transmission (even if the called number
was busy).
WITHOUT—no send report; however, your MF-
JET 450 notes all transmissions that took place
in its log (see chapter Hints & tips / Logs).
ALWAYS—a report is printed out after every
transmission (even if the transmission was un-
successful because of a fault).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips MF-Jet 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips MF-Jet 450 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips MF-Jet 450

Philips MF-Jet 450 User Manual - German - 44 pages

Philips MF-Jet 450 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info