160412
21
Zoom out
Zoom in
Previous page
1/25
Next page
English
21
Clock/Timer
The clock digits for the minutes flash.
8 Press TUNING 4 ¢ (or ¡ / ) to set the
minutes.
9 Press TIMER again and then press TUNING
4 ¢ (or ¡ / ) to select the desired sound
source: CD, USB, TUNER, or DAB.
0 Press TIMER again.
For CD, USB or DAB mode, "VOLUME XX"
appears.
For Tuner mode, "P XX" appears, where P
stands for the preset number. Press TUNING
4 ¢ (or ¡ / ) to select the desired radio
station. Then press TIMER again, "VOLUME XX"
appears.
! Press TUNING 4 ¢ (or ¡ / ) to set the
volume level.
" Press TIMER again to confirm the time.
The timer is now set and activated.
Notes:
– If no volume level or preset number is selected,
default is preset to 12 and 01 respectively.
Activating and deactivating
TIMER
In standby or during playback, press TIMER
once.
Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
Press SLEEP on the remote control once or
more.
Display shows and one of the sleep time
options in sequence: SLEEP 0FF, 120, 90,
60, 45, 30,15, 05, SLEEP 0FF...
To deactivate, press SLEEP on the remote
control once or more until SLEEP 0FF
is
shown, or press ECO POWER STANDBY-ON
on the system (or 2on the remote control).
disappears from the display.
Setting the clock
1 In standby or active mode, press CLOCK on
the remote control.
The clock digits for the hours flash.
2 Press TUNING 4 ¢ (or ¡ / on the
remote control) to set the hours.
3 Press CLOCK again.
The clock digits for the minutes flash.
4 Press TUNING 4 ¢ (or ¡ / on the
remote control) to set the minutes.
5 Press CLOCK to confirm the time.
Setting the timer
The system can be used as an alarm clock,
whereby the CD, USB, TUNER, or DAB is
switched on at a set time. The clock time needs
to be set first before the timer can be used.
1 In standby or active mode, press and hold
TIMER on the remote control.
"ON" appears and the hour digits for the
start timer starts flashing.
2 Press TUNING 4 ¢ (or ¡ / on the
remote control) to set the hours.
3 Press TIMER again.
The clock digits for the minutes flash.
4 Press TUNING 4 ¢ (or ¡ / ) to set
the minutes.
5 Press TIMER again.
"OFF" appears and the hour digits for the end
timer starts flashing.
6 Press TUNING 4 ¢ (or ¡ / ) to set
the hours.
7 Press TIMER again.
MCB204_05-Eng 4/18/07, 9:45 AM21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips mcb204 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips mcb204 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info