Manual Philips hr2850 (page 2 of 9) (English)

381060

Zoom out

Zoom in

1/9

ENGLISH

Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support that

Philips offers, register your product at www.philips.

com/welcome.

General description (Fig. 1)

A Lid of blender beaker

B Blender beaker

C Sealing ring of blender blade unit

D Blender blade unit

E Chopper beaker

F Chopper blade unit

G Sealing ring of chopper blade unit

H Safety lock

I Motor unit

J Pulse button

K Cord storage groove

L Mains cord

M Filter

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

Never immerse the motor unit in water or any

other liquid, nor rinse it under the tap. Only use

a moist cloth to clean the motor unit.

Warning

Check if the voltage indicated on the appliance

corresponds to the local mains voltage before

you connect the appliance.

To avoid a hazardous situation due to inadvertent

resetting of the thermal cut-out, never connect

this appliance to a timer switch.

Do not use the appliance if the mains cord, the

plug or other parts are damaged.

If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised

by Philips or similarly qualied persons in order

to avoid a hazard.

Never reach into the blender beaker with

your ngers or an object while the appliance is

plugged in or operates. The cutting edges of the

blade unit are very sharp.

If the blade unit gets stuck, unplug the appliance

before you remove the ingredients that block

the blade unit.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

Never let the appliance operate unattended.

Never use the blender beaker or the chopper

beaker to switch the appliance on and off.

Do not use the chopper to grind very hard

ingredients such as nutmeg and Chinese rock

sugar.

Do not use the chopper to mix liquids or to

crush ice cubes. Use the blender to process

these ingredients.

Do not touch the cutting edges of the blade

units when you handle or clean them. They are

very sharp and you can easily cut your ngers

on them.

Caution

Always unplug the appliance before you

assemble, disassemble or make adjustments to

any of the parts.

Never use any accessories or parts from

other manufacturers or that Philips does

not specically recommend. If you use such

accessories or parts, your guarantee becomes

invalid.

Do not exceed the maximum level indicated

on the blender beaker and the chopper

beaker.

Do not exceed the quantities indicated in the

tables.

Let hot ingredients cool down before you put

them in the blender beaker or chopper beaker

(max. temperature 80°C).

Never operate the blender for more than 1

minute without interruption.

Never operate the chopper for more than 30

seconds without interruption.

Safety features

Built-in safety lock

This feature ensures that you can only switch on

the appliance if you have assembled the blender

beaker or the chopper beaker correctly on the

motor unit. If the blender beaker or chopper

beaker is assembled correctly, the built-in safety

lock is unlocked.

Thermal cut-out

The appliance is equipped with a thermal cut-out

that automatically cuts off the power supply to the

appliance if it overheats.

If the appliance suddenly stops running:

1 Remove the plug from the wall socket.

2 Let the appliance cool down for 30 minutes.

3 Put the plug in the wall socket.

4 Switch on the appliance again.

Note: Contact your Philips dealer or an authorised

Philips service centre if the thermal cut-out is

activated too often.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this

user manual, the appliance is safe to use based on

scientic evidence available today.

Before first use

1 Clean all parts except the motor unit (see

chapter ‘Cleaning’).

Using the appliance

Blender

The blender is intended for:

Blending uids, e.g. dairy products, sauces, fruit

juices, soups, mixed drinks, shakes.

Mixing soft ingredients, e.g. pancake batter.

Pureeing cooked ingredients, e.g cooked beans.

Preparing baby food.

Do not touch the cutting edges of the blender

blade unit when you handle or clean it. They are

very sharp and you can easily cut your ngers on

them.

1 Make sure the sealing ring is placed properly

onto the blender blade unit.

2 Insert the blender blade unit into the bottom

of the blender beaker (1). Turn the blade unit

clockwise to x it (2) (Fig. 2).

3 Put the ingredients in the blender

beaker (Fig. 3).

See the table for the recommended quantities.

Do not ll the blender beaker beyond the MAX

indication.

Never ll the blender beaker with ingredients

that are hotter than 80°C.

Ingredients blender Quantities

fruit 20g

vegetables 60g

vegetable juice 100g vegetables + water

(optional)

milkshake 120g fruit + 250ml milk

ice cubes max. 6 small ice cubes

soups 400ml water

4 Place the blender beaker on the motor unit

(1). Turn the blender beaker clockwise to x

it (‘click’) (2) (Fig. 4).

Do not exert too much pressure on the blender

beaker.

5 Put the lid on the beaker (1). Turn the lid

until the sieve is located in front of the spout

(2) (Fig. 5).

6 Put the plug in the wall socket and press the

pulse button.

Hold the motor unit rmly with both hands

when the appliance operates.

Never operate the blender for more than 1

minute without interruption.

If you have not nished blending after 1 minute,

release the pulse button and wait 1 minute before

you continue. If the appliance becomes hot, let it

cool down before you continue.

Never reach into the blender beaker with your

ngers or an object (e.g. a spatula) while the

blender operates.

Tips

If the ingredients stick to the wall of the

blender beaker, unplug the appliance and

remove the ingredients from the wall with a

spatula (Fig. 6).

To avoid spillage, never ll the beaker above

the MAX indication (0.6 litres).

Cut solid ingredients into smaller pieces

(1-2cm) before you put them in the blender

beaker. Do not process a large quantity of solid

ingredients at the same time. Process a series

of small batches instead.

You can pour liquid ingredients (e.g. oil) into

the blender beaker through the opening in the

lid while the appliance operates (Fig. 7).

Chopper

The chopper is intended for chopping

moist ingredients such as meat, onion, garlic

etc (Fig. 8).

Do not touch the cutting edges of the chopper

blade unit when you handle or clean it. They are

very sharp and you can easily cut your ngers on

them.

Do not use the chopper to grind very hard

ingredients such as nutmeg and Chinese rock

sugar.

1 Cut the ingredients into smaller pieces

(approx. 1-2cm) and put them in the chopper

beaker (Fig. 9).

See the table for the recommended quantities.

Do not ll the chopper beaker beyond the MAX

indication.

4222.002.7032.3

2/9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr2850 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips hr2850 Manual

Product: