380682
4
Zoom out
Zoom in
Previous page
1/104
Next page
Automatic cut-out
Read these instructions carefully before you start using the
appliance
To prevent damage due to overheating, your appliance has been
equipped with an automatic cut-out system. In case of overheating, this
system will automatically cut off the power supply to the appliance.
If you follow the instructions below, you can switch on the appliance
again after you have let it cool down for 15 minutes.
If your appliance suddenly stops running:
- Pull the mains plug out of the socket
- Set the switch to position O
- Let the appliance cool down for 15 minutes
- Put the mains plug back in the socket
- Switch on the appliance again.
Please contact your Philips dealer or an authorised Philips service centre
if the automatic cut-out system is activated time and again.
Important
Read the directions for use and look at the illustrations before you
start using the appliance.
Remove the protective cover from the blade each time you use it.
Be very careful when you pick up the blade, the knife of the
blender and the slicing/grating disc. They are very sharp!
Thoroughly clean the parts that will come into contact with food
before you use the appliance for the first time.
Place the lid on the bowl in the right position. The built-in safety
lock will now be deblocked and you will be able to turn on the
appliance.
Note that if both the blender and the bowl have been correctly
mounted, only the blender will function.
Never let the appliance run unattended.
Never let children run the appliance.
When you are mixing or blending liquids, do not exceed the
maximum content indicated on the bowl or the blender (top line of
the graduation).
Do not exceed the maximum amounts and processing times
indicated in the table.
Wait until moving parts have stopped running before you remove
the lid of the appliance.
Never put your fingers or objects (e.g. a spatula) in the chute while
the appliance is running. Only the pusher is to be used for this
purpose.
Never put your fingers or objects (e.g. a spatula) in the blender
unless you have unplugged the appliance first.
Never immerse the motor unit in water or any other liquid. Do not
rinse it either.
Unplug the appliance after use.
If the mains cord of this appliance is damaged, it must always be
replaced by Philips or a service centre authorised by Philips, in
order to avoid hazardous situations.
Keep these directions for use for future reference.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 7724 cucina at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 7724 cucina in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info