369564
2
Zoom out
Zoom in
Previous page
1/7
Next page
4 Remove the shaving heads from the shaving unit
one by one (Fig. 14) .
Note: Do not clean more than one cutter and guard at a
time, since they are all matching sets. If you accidentally mix
up the cutters and guards, it may take several weeks before
optimal shaving performance is restored.
5 Remove the cutter from the guard (Fig. 15) .
6 Clean the cutter with the short-bristled side of the
brush (Fig. 16) .
7 Brush the guard (Fig. 17) .
8 Put the shaving heads back into the shaving unit.
9 Put the retaining frame back into the shaving unit
and turn the wheel clockwise.
10 Put the shaving unit back onto the shaver.
Tip: For optimal shaving performance, we
advise you to lubricate the shaving heads with a drop of
sewing machine oil every six months.
Storage
- Put the protection cap on the shaver after use to
prevent damage to the shaving heads (Fig. 8) .
Replacement
Replace the shaving heads every two years for optimal
shaving results.
Replace damaged or worn shaving heads with HQ4+
Philips Micro+ Lift & Cut
Shaving Heads.
1 Switch off the shaver.
2 Pull the shaving unit off the shaver
(Fig. 10) .
3 Turn the wheel anticlockwise (1) and remove the
retaining frame (2) (Fig. 13) .
4 Remove the shaving heads from the shaving unit
and replace them with new ones (Fig. 14) .
5 Put the retaining frame back into the shaving unit
and turn the wheel clockwise.
6 Put the shaving unit back onto the shaver.
Accessories
To retain the top performance of your shaver, make sure
you clean it regularly
and replace its shaving heads at the
recommended time.
Shaving heads
- We advise you to replace your shaving heads every
two years. Always replace with HQ4+ Philips Micro+
Lift & Cut Shaving Heads (Fig. 18)
Cleaning
- Use Cleaning Spray (HQ110, not
available in some countries) to clean the shaving
heads thoroughly.
Environment
- Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an of cial collection point for recycling. By doing
this, you help to preserve the environment (Fig. 19) .
- Batteries contain substances that may pollute
the environment. Do not throw away empty
batteries with the normal household waste, but
dispose of them at an of cial collection point for
batteries. Always remove the rechargeable batteries
before you discard and hand in the appliance at an
of cial collection point.
Disposal of the rechargeable battery
Only remove the rechargeable battery when it is
completely empty.
1 Disconnect the shaver from the mains.
2 Let the shaver run until it stops, undo the screw on
the back of the shaver (1) and lift the back panel off
the shaver (2) (Fig. 20) .
3 Remove the rechargeable
battery (Fig. 21) .
Do not connect the shaver to the mains again after the
battery has been removed.
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at www.philips.
com or contact the Philips Consumer Care Centre
in your country (you nd its phone number in the
worldwide guarantee lea et). If there is no Consumer
Care Centre in your country, go to your local Philips
dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are not covered
by the terms of the international guarantee because they
are subject to wear.
Troubleshooting
Problem Solution
The shaver
does not shave
as well as it
used to.
You may not have cleaned the
appliance properly. Clean the shaving
heads thoroughly (see chapter
‘Cleaning and maintenance’).
Problem Solution
Long hairs may be obstructing the
shaving heads. Clean the cutters
and guards properly with the brush
supplied (see chapter ‘Cleaning and
maintenance’).
The shaving heads may be damaged
or worn. Replace the shaving heads
(see chapter ‘Replacement’).
The batteries may be
running low. Recharge
the shaver (see chapter ‘Charging’).
The
shaver does
not switch on
when I push
the on/off slide
upwards.
The batteries may be empty.
Recharge the shaver (see chapter
‘Charging’).
ภาษาไทย
ขอมูลเบื้องตน
ขอแสดงความยินดีที่คุณสั่งซื้อและยินดีตอนรับสูผลิตภัณฑของ Philips! เพื่อใหคุณได
รับประโยชนอยางเต็มที่จากบริการที่
Philips มอบให โปรดลงทะเบียนผลิตภัณฑของคุณที
www.philips.com/welcome
ขอสําคัญ
ควรอานคูมืออยางละเอียดกอนใชงานและเก็บไวเพื่อใชอางอิงในครั้งตอไป
อันตราย
- ควรเช็ดเครื่องใหแหงสนิท
- เครื่องหมายนี้แสดงวา: หามทําความสะอาดเครื่องโดยเปดนํ้ากอกใหไหลผาน
เครื่อง
คําเตือน
- ไมควรใหบุคคล (รวมทั้งเด็กเล็ก) ที่มีสภาพรางกายไมแข็งแรงหรือสภาพจิตใจ
ไมปกติ หรือขาดประสบการณและความรูความเขาใจ นําเครื่องนี้ไปใชงาน เวน
แตจะอยูในการควบคุมดูแลหรือไดรับคําแนะนําในการใชงานโดยผูที่รับผิดชอบ
ในดานความปลอดภัย
- เด็กเล็กควรไดรับการดูแลเพื่อปองกันไมใหเด็กนําผลิตภัณฑนี้ไปเลน
ขอควรระวัง
- ใชและจัดเก็บเครื่องโกนหนวดไวที่อุณหภูมิระหวาง 5°C และ 35°C
Electromagnetic fields (EMF)
- ผลิตภัณฑของ Philips ไดมาตรฐานดานคลื่นแมเหล็กไฟฟา (EMF) หากมีการ
ใชงานอยางเหมาะสมและสอดคลองกับคําแนะนําในคูมือนี้ คุณสามารถใช
ผลิตภัณฑไดอยางปลอดภัยตามขอพิสูจนทางวิทยาศาสตรในปจจุบัน
การชารจแบตเตอรี่
ในการชารจไฟครั้งแรกหรือหลังจากที่ไมไดใชงานเครื่องโกนหนวดเปนเวลานาน ควร
ชารจไฟทิ้งไวตอเนื่องนาน 12 ชั่วโมง ปกติเวลาชารจไฟจะใชเวลาประมาณ 8 ชั่วโมง
ชารจเครื่องโกนหนวดเมื่อมอเตอรหยุดทํางานหรือเริ่มทํางานชาลง
เมื่อชารจไฟจนเต็มเรียบรอยแลว สามารถใชงานเครื่องโกนหนวดแบบไรสายไดนาน
ถึง 30 นาที
คําเตือน: หามเชื่อมตอเครื่องโกนหนวดเขากับสายไฟหลักนานเกิน 24 ชั่วโมง
1 ปดการใชงานเครื่องโกนหนวดกอนเริ่มตนชารจไฟ
2 ดึงขาเสียบออกมา (เสียงดัง ‘คลิก’) (รูปที่ 2)
3 เสียบปลั๊กไฟเขากับเตารับบนผนัง (รูปที่ 3)
, สัญญาณไฟจะสวางขึ้น เพื่อแสดงใหทราบวาเครื่องกําลังชารจไฟ
อยู (รูปที่ 4)
4 ถอดเครื่องโกนหนวดออกจากเตาเสียบ หลังจากชารจเสร็จแลว
5 กดปุมปลดล็อค (1) แลวพับขาเสียบกลับเขาไปในตัวเครื่อง (2) (เสียง
ดัง ‘คลิก’) (รูปที่ 5)
การใชงาน
1 ถอดฝาครอบปองกันออก
2 เลื่อนสวิตชเปด/ปดไปดานหนาเพื่อเปดใชงาน
(รูปที่ 6)
3 เคลื่อนหัวโกนไปตามผิวหนัง ทั้งในแนวตรงและวนไปมาอยาง
รวดเร็ว (รูปที่ 7)
หมายเหตุ: ใชโกนหนวดขณะผิวแหงจะไดผลดีที่สุด
หมายเหตุ: อาจตองใชเวลาประมาณ 2 หรือ 3 สัปดาหเพื่อใหผิวของคุณปรับ
สภาพใหเหมาะสมกับเครื่องโกนหนวด Philips
4 เลื่อนสวิตชเปด/ปดไปดานหลังเพื่อปดการทํางาน
5 ปดฝาครอบหัวโกนลงบนเครื่องโกนหนวดทุกครั้ง เพื่อปองกันไมใหหัว
โกนชํารุด (รูปที่ 8)
การทําความสะอาดและบํารุงรักษา
ควรทําความสะอาดเปนประจํา เพื่อใหการใชงานเปนไปอยางมีประสิทธิภาพ
คําเตือน: ควรใชงานและเก็บในที่แหง เนื่องจากเครื่องโกนหนวดรุนนี้ไม
สามารถกันนํ้าและลางทําความสะอาดดวยนํ้าประปาได
เพื่อใหไดผลลัพธการทําความสะอาดที่ดีที่สุด ขอแนะนําใหใชสเปรยทําความสะอาด
ของ Philips (HQ110)
ทุกสัปดาห: อุปกรณในการโกนหนวดและชองเก็บเศษหนวด
1 ปดสวิตซเครื่องโกนหนวด
2 ทําความสะอาดดานนอกของหัวโกนดวยแปรงที่จัดมาให (รูปที่ 9)
3 ดึงชุดหัวโกนออกจากเครื่องโกนหนวด (รูปที่ 10)
4 ทําความสะอาดภายในชุดหัวโกน (รูปที่ 11)
5 ทําความสะอาดชองเก็บเศษหนวด (รูปที่ 12)
6 ประกอบชุดอุปกรณโกนหนวดกลับเขาที่เดิม
ทุกๆ 2 เดือน: หัวโกน
หมายเหตุ: ไมควรใชนํ้ายาหรือแอลกอฮอลทําความสะอาดหัวโกน ควรใชส
เปรยนํ้ายาทําความสะอาดหัวโกนรุน HQ110 เทานั้
1 ปดเครื่องโกนหนวด
2 ดึงชุดหัวโกนออกจากเครื่องโกนหนวด (รูปที่ 10)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hq 852 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hq 852 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info