398385

Philips hp 4872 sensor care Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
Product
Assistance
17. While using this appliance, keep your hair
away from air intake grill.
18. Do not direct hot air towards eyes or other
sensitive areas.
19. Attachments may be hot during use. Allow
them to cool before handling.
20. Do not let the cord become twisted or
tangled when not in use.
21. Do not use an extension cord with this
product.
22. Do not operate with a voltage converter.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
SPECIAL POLARIZED PLUG
INSTRUCTIONS
This Philips SensorCare Hair Dryer has a polar-
ized plug (one blade is wider than the other).
• To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
• If plug does not fit fully in the outlet at first,
reverse the plug.
• If plug still does not fit, contact a qualified
electrician.
DO NOT ATTEMPT TO DEFEAT THIS
SAFETY FEATURE
CHECK ALCI
SAFETY FEATURE
EVERY TIME
YOU USE THIS
APPLIANCE
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety feature
that renders it inoperable under some abnormal
conditions, such as immersion in water.
To make sure the ALCI is functioning properly,
perform the following test.The purpose of this
test is to allow you to make sure the water
sensing system (ALCI) is working.
1. Plug the appliance in, turn ON, and press test
button on plug.
2. The appliance will stop working.There will
be an audible click and the reset button will
pop out.
3. To reset ALCI with reset button, unit should
be unplugged.Then push reset button in, and
reinsert plug into outlet.
4. If ALCI is not functioning properly, return
appliance to an Authorized Norelco Service
Location for examination and repair.
5. It is important that if immersion occurs, this
unit be brought to an Authorized Norelco
Service Location. Do not try to reset.
6. Be sure to repeat test every time you use the
unit to confirm ALCI is operational.
NOTE: Should the appliance go OFF and reset
button pop up during use, this could indicate a
malfunction in the unit. Remove plug from outlet
and allow the unit to cool. Return the unit to an
Authorized Norelco Service Location for exami-
nation and repair or call 1-800-243-7884.
THIS PRODUCT IS EQUIPPED WITH AN
AUTOMATIC OVERHEATING PROTEC-
TION DEVICE
• If the appliance overheats, it will automatically
turn OFF.
• Unplug the appliance.
• After cooling down for a few minutes, the
appliance can be used again.
• Before reusing, check the intake and outtake
grills for possible blockage by hair, fuzz, etc.
• If in doubt, return the Hair Dryer to an
Authorized Norelco Service Location for
examination and repair.
For assistance or the Authorized Norelco Service
Location nearest you, call toll free:
Authorized Norelco Service Location information
is available 24 hours a day, 7 days a week.
In North America, Central America and South
America, the most common voltage is between 100V
and 130V AC.When traveling to other countries,
common voltage may range to 240V AC. Your new
Hair Dryer may be used with voltage ranging from
110–130 V AC only.
• DO NOT USE HAIR DRYER WITH ANY
TYPE OF CONVERTER
Voltage
1-800-243-7884
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hp 4872 sensor care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hp 4872 sensor care in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info