Important
• Read these instructions for use
carefully before using the appliance,
• Connect the appliance to an earthed wall
socket.
• Check whether the voltage indicated on
the type plate is the same as in your
home.
• Position the appliance so that:
- the mains lead is not hanging over the
edge of the table or sink;
- children cannot touch it when in use;
- it is standing on a flat surface with
sufficient free space around left.
• Always heat up the appliance first,
before starting to cook.
• Do not leave the appliance in operation
without supervision.
• Avoid touching the metal parts as they
become very hot.
For safe handling please refer to the
illustration.
• The baking plates are covered with a
non-stick coating. Therefore do not let
sharp or abrasive items come into
contact with the surface of the baking
plates.
• Remove the mains plug from the wall
socket after use.
• Always clean the appliance after use.
Allow it to cool down first. Never
immerse it into water.
• If the mains cord of this appliance is
damaged, it must be replaced by the
special cord.
Apply to your Philips dealer or to the
Philips organisation in your country.
• Save these instructions for future
reference.
General description
A Baking plates with non-stick coating.
B Handgrips.
C Pilot light. When this light is on the baking
plates are being heated.
D Temperature control.
E Stand/cord storage.
F Spatula.
4
English
Before using for the first time
- Clean the baking plates with a damp cloth or
sponge.
- Slightly grease the baking plates with a little
cooking oil.
• Take care to prevent water from running into
the appliance.
How to bake nice crispy waffles
Making batter
- Make the batter as indicated in the recipes in
these instructions for use or in the separate
recipes booklet.
Note: For the best results, allow the batter to
swell for half an hour before baking.
Pre-heating
- Insert the mains plug into the wall socket.
- Select the required baking temperature.
Please note: the results (browning, crispiness)
depend on the baking temperature as well as
the duration of the baking and the quality of the
batter!
- The waffle iron should be kept in the closed
position to allow the appliance to pre-heat for
about 5 minutes. When the pilot light goes out,
the appliance is ready for use.
- Apply some butter or oil to the surface of the
hotplates using a brush.
Baking
- Pour about 150 ml of the batter onto the bottom
baking plate.
- Close the waffle maker, pressing the baking
plates together.
- After 2-3 minutes the waffle will be ready.
(The baking time depends on the thickness of
the batter.)
- Open the waffle maker and take the waffles
from the baking plate using a wooden spatula.
- Let the waffles cool down on a wire rack so that
they become crispy.
• Longer cooking times and higher temperatures
will result in darker waffles, whereas shorter
cooking times and lower temperatures will give
lighter results.
• The built-in thermostat switches the heating
elements on and off to maintain the set cooking
temperature. When the pilot light is on the
cooking plates are being heated.
