445946
3
Zoom out
Zoom in
Previous page
1/9
Next page
Storage
1 Set the steam control to position 0, remove the
plug from the wall socket and let the iron cool
down.
2 Clean the appliance and wipe scale and any other
deposits off the soleplate with a damp cloth and a
non-abrasive (liquid) cleaner.
Keep the soleplate smooth: avoid hard contact with
metal objects.
Never use a scouring pad, vinegar or other chemicals.
3 Regularly rinse the water tank with water and
empty it after cleaning (Fig. 14).
4 Wind the mains cord round the cord storage
facility (Fig. 15).
5 Always store the iron on its heel in a safe and dry
place.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an ofcial collection point for recycling. By doing
this, you help to preserve the environment (Fig. 16).
Guarantee & service
If you need information or if you have a problem, please
visit the Philips website at www.philips.com or contact
the Philips Customer Care Centre in your country
(you nd its phone number in the worldwide guarantee
leaet). If there is no Customer Care Centre in your
country, go to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and
Personal Care BV.
Frequently asked questions
This chapter lists the questions most frequently asked
about the appliance. If you cannot nd the answer to
your question, contact the Customer Care Centre in your
country.
General:
Question Answer
Why does the
soleplate stay
cold although I
have plugged in
the iron?
There may be a connection
problem. Check the mains cord,
the plug and the wall socket.
The temperature dial may be set
to MIN. Set the temperature dial
to the required position.
Why do water
droplets drip
onto the fabric?
The cap of the lling opening may
not be closed properly. Press the
cap until you hear a click.
You may have poured an
additive into the water tank. Rinse
the water tank and do not put any
additive in the water tank.
The iron may not be hot enough
for steam ironing. Set the
temperature dial to a temperature
suitable for steam ironing ( 2 to
MAX). Put the iron on its heel and
wait until the amber temperature
light goes out.
Why do akes
and impurities
come out of the
soleplate during
ironing?
Hard water forms akes inside
the soleplate. Use the Calc-
Clean function one or more
times (see chapter ‘Cleaning and
maintenance’).
Why does the
red light ash
(GC3360 only)?
The safety shut-off function may
have switched off the iron (see
chapter ‘Features’). Move the iron
slightly to deactivate the safety
shut-off function. The red light goes
out.
Why does water
drip from the
soleplate after
the iron has
cooled down or
has been stored
(GC3321/3320
only)?
You may have put the iron in
horizontal position with water
still left in the water tank. Empty
the water tank and set the steam
control to position 0 after use.
Store the iron on its heel.
,
Steam ironing:
Question Answer
Why
doesn’t any
steam come out
of the iron?
There may not be enough water in
the water tank. Fill the water tank
(see chapter ‘Preparing for use’).
The steam control may be set to
position 0. Set the steam control
to a position between 1 and 4 (see
chapter ‘Using the appliance’).
The iron may not be hot enough
and/or the drip-stop function has
been activated. Select an ironing
temperature that is suitable for
steam ironing ( 2 to MAX). Put
the iron on its heel and wait until
the amber temperature light goes
out before you start to iron.
Why doesn’t
the horizontal
or vertical
steam boost
function work?
You may have used the steam
boost function too often within
a short period. Continue ironing in
horizontal position and wait a while
before you use the horizontal or
vertical steam boost function again.
The iron may not be hot enough.
Select an ironing temperature that
is suitable for steam ironing ( 2 to
MAX). Put the iron on its heel and
wait until the amber temperature
light goes out before you start to
iron.
4239.000.6594.2
3/9
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC3332 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC3332 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips GC3332

Philips GC3332 User Manual - English, German, Dutch, French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info