214986
32
Zoom out
Zoom in
Previous page
1/33
Next page
–’Monitor out has been enabled, but the external monitor is not correctly connected (the picture
on both displays is too bright).
Connect the (optional) VGA Y-cable (See Connecting to an external monitor under
Installation).
If the VGA Y-cable is correctly connected, verify whether the input impedance of the monitor
is correctly set on 75 Ohm.
–’Monitor out has not been enabled, but the external monitor is connected
(the picture on both displays is too dark).
Enable the Monitor out option. Press Menu and use cursor control to go to Settings in the
menu bar. Select Monitor out and select On.
–‘Tastensperre aktiv.
Drücken Sie OK für 10 Sekunden, um Tastensperre aufzuheben.
Quelle Komponenten-Video wird bei RGBS-Anschluss nicht automatisch gewählt.
Wählen Sie Quelle Komponenten-Video manuell anhand der Taste Source am Projektor
oder auf der Fernbedienung.
Allgemeines:
Überprüfen Sie, dass die Batterien richtig in die Fernbedienung eingelegt sind und/oder
wechseln Sie die Batterien.
Überprüfen Sie, dass der Projektor die Signale von der Fernbedienung empfängt.
Überprüfen Sie, dass das USB-Kabel bzw. das PS/2-Kabel richtig angeschlossen wurde.
Überprüfen Sie, dass sowohl Projektor als auch Computer eingeschaltet sind.
Ziehen Sie das USB-Kabel oder PS/2-Kabel ab und nehmen Sie anschließend den erneuten
Anschluss vor.
Bei PS/2-Anschluss:
Die PS/2-Maus des angeschlossenen Laptops hat Vorrang vor der Projektormaus-
Durchschleifverbindung.
Deaktivieren Sie die PS/2-Maus des Laptops durch Wahl von Im Hardwareprofil deaktivieren
in Windows-Mauseigenschaften des Laptops. Dann starten Sie Windows im Laptop erneut.
Die Projektormaus-Durchschleifverbindung hat jetzt Vorrang, wobei die Laptop-Maus
weiterhin benutzt werden kann.
Schalten Sie alle Geräte ab und nehmen Sie anschließen den erneuten Anschluss vor, während
Sie sicherstellen, dass Sie:
das PS/2-Kabel an den PC und Projektor vor Einschalten des PCs anschließen;
den Projektor vor Einschalten des PCs einschalten;
nicht das USB-Kabel beim Herstellen des PS/2-Anschlusses anschließen.
Beziehen Sie sich auch auf die Benutzeranleitung oder begleitenden Informationen Ihres
Computers.
Das Bild ist zu dunkel oder
zu hell bei
angeschlossenem
externem Monitor
Keine Reaktion bei
Tastenbetätigung auf
lokaler Tastatur oder
Fernbedienung
Kein Bild, wenn
RGBS- (Scart) Anschluss
hergestellt wurde
Maus-Cursor reagiert
nicht bei Benutzung der
Cursorsteuerung auf der
Fernbedienung
Philips Heimkinoprojektor Deutsch Benutzersanleitung Garbo 32
7. Fehlersuche >
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips garbo lcd projektor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips garbo lcd projektor in the language / languages: German as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info