482520
7
Zoom out
Zoom in
Previous page
1/138
Next page
7
applies water to the floor. The active protection
system is also activated when the mopping
brushes are too wet or when you move the
appliance over a carpet.
1.3 Usage restrictions
Only use this appliance on hard floors with
a water-resistant top coat (such as linoleum,
enamelled tiles and varnished parquet). These
treated floors are the standard type of floors
sold worldwide. If your floor has not been
treated to make it water-resistant, check with
the manufacturer if you can use water to
clean it. Do not use this appliance on hard
floors of which the water-resistant top coat is
damaged.
Do not use this appliance to clean carpets.
Do not push the appliance over the floor
grilles of convector heaters. As the appliance
cannot pick up water that comes out of the
nozzle when you move it over the grille, water
ends up at the bottom of the convector pit.
Do not move the mopping nozzle sideways,
as this leaves water traces. Only move the
mopping nozzle forwards and backwards.
1.4 Floor maintenance
Always follow the cleaning and maintenance
instructions and the maintenance programme
for your hard floor when you use this
appliance.
This appliance is meant for regular cleaning
of hard floors. Do not use it to apply floor
maintenance products to hard floors. Only
use a liquid floor cleaner that can be diluted in
water to clean the floor. Make sure you use a
low-foaming or non-foaming floor cleaner that
is suitable for your hard floor.
Never exceed the maximum quantities
mentioned on the bottle when you use a
liquid floor cleaner.
Do not clean the mopping brushes with a
sharp object, as this may damage the brush
hairs and reduce the cleaning performance of
the mopping brushes.
Do not let the appliance operate in the same
spot too long, as this may damage the floor.
Clean the mopping brushes according to
the instructions in chapter ‘Cleaning and
maintenance’.
The mopping brushes are not dishwasher-
proof or washing machine-proof.
Only replace the mopping brushes with
original mopping brushes from Philips. For
replacement instructions and information, see
chapter ‘Replacing the mopping brushes’. For
ordering new mopping brushes, see chapter
‘Ordering accessories’.
1.1 Electromagnetic fields
(EMF)
This appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
1.2 Active protection system
The AquaTrio is equipped with an active
protection system. This active protection system
has been designed to recognise when a foreign
object other than dirt or liquid is picked up from
the floor. When the system is activated, it stops
the mopping brushes immediately to prevent
damage to the object and appliance. The motor
sound decreases and the appliance no longer
ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC7070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC7070 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 14,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info