Manual Philips F2121 (page 3 of 22) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

780609

Zoom out

Zoom in

1/22

English

Controls,

connections, etc.

Fig.

ON/OFF

station relocation sliders

With these sliders you can mark the posltions of

your favourite stations on the

scale.

® FM stereo indicator

® long wave selector switch

medium wave selector switch

® FM selector switch

tuning

knob

® pointer tor AM/FM tuning,

with

bi-colour LED

tor AM field strength and FM zero centre

tuning

Fig.

® socket for AM aerial and earth

socket for FM aerial, 75 ohm

signal

output

lead for amplifier

Supply

Since

this tuner has no separate mains supply, its

supply lead © should be connected to the supply

socket

of the matching amplifier concerned. The

tuner can be switched on and off either

with

its

mains

switch ® or

with

the mains switch of the

amplifier.

Connections

Amplifier

Signal

output

lead @ should be connected to the

appropriate

input

sockets of the matching amplifier.

Connect

the plug, marked 'L' to the

left

channel,

the

one marked 'R' to the

right

channel of the amplifier.

• FM-aerials

Strong or local FM-stations can be received using

the wire aerial supplied, to be connected to the

socket

©.

Since

it is a directional device it should

be orientated for

optimum

reception.

For

best results, particularly in the

case

of FM-

stereo

reception, an external aerial should be

employed.

Depending upon the characteristic impedance of

the cable being used (75 ohm or 300 ohm) connec-

tion

should be made either to socket © or ©.

• AM-aerials

The

integral ferrite rod aerial wil! provide satisfac-

tory

reception of strong, local stations.

In fringe

areas

or in locations surrounded by

steel-framed buildings, where satisfactory recep-

tion

cannot be obtained

with

the ferrite rod

aerial,

AM-outdoor

aerial should be connected to the

terminal ®,

T-side.

An earth lead may be connect-

ed to the 4-side of this terminal.

This

may help to

eliminate any interference.

Operatlon

• Switch the set on

with

®.

Tuning

to FM-stations

• Depress FM selector switch ©.

• Tune to the desired station

with

knob @.

While

tuning

interstation noise is automatically

reduced to an acceptable level.

• Tuning is

optimum

and can be stopped when the

colour of pointer LED ® changes

trom

red

into

green.

A servo circuit will automatically tune the

station to its zero centre and lock it in this position.

Remark:

This

circuit does not function when

receiving a weak station.

The

reception quality of FM-stereo broadcasts

depends to a large extent upon the strength of the

stereo

signal being received.

When receiving strong signals, high quality, low

noise

reception will result and FM stereo indicator

lights.

When receiving weak signals, stereo noise may

spoil the programme content. In this

case

integrated 'sliding stereo' circuit will automatically

improve the signal-to-noise ratio.

Stations

with

a signal strength below the sliding

stereo

range will be received but, however, repro-

duced in mono. In this

case

does

not

light

and pointer LED ® remains red.

Tuning

to AM stations

• Depress either long wave selector switch ® or

medium wave selector switch ®. Pointer LED ®

will generally illuminate in red.

• Tune to the desired station

with

knob @.

While

tuning-in

a strong station the colour of pointer

LED

® will change

from

red

into

green. Adjust for

optimum

reception.

Remark:

When receiving weak AM stations (either

long wave or medium wave) the colour of pointer

LED

® will not change

from

red

into

green, but will

remain red.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips F2121 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips F2121 Manual

Product: