288271
70
Zoom out
Zoom in
Previous page
1/76
Next page
68
Troubleshooting
Before sending the unit for repairs, first refer to the following checklist for a possible
solution to the problem. If you still cannot correct the problem, please contact the service
representatives.
Power Source Problems
Remedy
Install the batteries correctly or re-
place with fresh batteries.
Reconnect the AC adaptor.
Press the Release button more
than one second or turn on the
power again.
Replace the old batteries with
fresh batteries.
Replace the batteries.
Cause
The batteries are not installed
properly or are depleted.
The AC adaptor is not connected
properly.
The Auto Power Off feature shuts
down the camera after several
minutes of inactivity.
The batteries are depleted.
The batteries were subjected to
excessively low or high tempera-
tures.
The built-in flash was used too fre-
quently because of dark condi-
tions or other reasons.
Problem
No power
Sudden loss of power
The batteries go dead
quickly.
Shooting and Playback Problems
Cause
The batteries are not inserted
properly (incorrect polarity) or are
dead.
The power is off, or the REC(ord)/
PLAY switch is set to PLAY.
The shutter release button is not
fully pressed down. (Button was
pressed only halfway down.)
The internal memory is full.
The Self Timer mode is selected.
The flash is recharging.
Flash Off mode is selected.
The White Balance mode or
Macro mode is set.
The batteries are dead.
Remedy
Reposition the batteries correctly
or replace with fresh batteries.
Slide the main switch to [Record].
Press the Release button all the
way down.
Delete some files to secure
enough space.
Press the SELF TIMER button to
cancel the Self Timer mode.
Wait until the flash lamp stops
flashing.
Press the FLASH button to
change the setting.
Press the flash button while press-
ing the U button, then cancel the
White Balance mode, or rotate the
Macro dial to cancel the Macro
mode.
Replace with fresh batteries.
Problem
The camera fails to
record the picture when
the Release button is
pressed.
The flash does not
work or recharge.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips esp 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips esp 2 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info