301428
85
Zoom out
Zoom in
Previous page
1/88
Next page
ErgoLine D310/320
Customer Engineer Manual
Page 5-
11
Maintenance
The following functional tests of the ErgoLine D330 & D340 terminals allow the
Display, Keyboard, LED’s, Memory and Interface to be tested.
Self test of the ErgoLine D310
If the terminal is powered up with the handset on hook and the '*' and '#' keys
pressed together a factory self test mode is entered. This mode clears all
programmed data and programming locks.
If the terminal is powered up with the handset on hook and the '7' and '9' keys
pressed together an installer self test mode is entered. This does a self test only. It
retains programmed data and locks.
After completion of a self test the terminal attempts a normal start-up.
Refer to Figure 5.1 for the names and locations of the keys.
The self test performs the following functions in sequence:
1 The micro-controller ROM is verified with a checksum.
2 The D310-2 external RAM is verified. Some of the D310-4 microcontroller RAM
is verified. If both ROM and RAM are satisfactory the loudspeaker LED begins
flashing, otherwise the self test halts and the phone will not try to go in-
service.
3 The EEPROM is verified. If satisfactory the message waiting LED begins
flashing, otherwise the self test halts.
4 For factory self test the terminal settings and memory keys revert to their
defaults if the EEPROM check succeeds. For installer self test they are
retained.
5 The D310-2 U
p
interface is looped back internally and tested. If a fault
occurs, the self test halts and the loudspeaker LED is lit continuously.
6 The D310-2 IOM2 interface and CODEC are tested. If a fault occurs, the self
test halts and the message waiting LED is lit continuously.
7 The user next lifts the handset. The LEDs are extinguished.
8 Press keys in this order: Loudspeaker LNR 1 2 3 4 5 6 7 8 9 * 0 # Program M1
M2 M3 Recall.
9 After each key is detected in sequence a short beep is emitted. If an
incorrect key is pressed, an error beep is emitted. A pause of over 5 seconds
between keys results in an error beep.
10 The user now replaces the handset. At this point the ringer is sounded till the
user goes off-hook.
11 Lifting the handset finishes self test with a confidence beep and lets the
watch-dog expire to reset the D310. The set generates an outgoing call
request in response to the off-hook condition.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ergoline d340 2 dg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ergoline d340 2 dg in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips ergoline d340 2 dg

Philips ergoline d340 2 dg User Manual - Dutch - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info