638977
1
Zoom out
Zoom in
Previous page
1/2
Next page
1
Connect
Before Connecting
If your TV is currently connected to a VCR, you have to
unplug all the connections from your VCR and TV.
Your new Philips Recorder replaces the VCR for your
recording needs.
A Plug in the antenna cable to the socket on this
recorder.
B Use the supplied RF coaxial cable to connect the
TV socket on this recorder to the Antenna In
socket on the TV.
C Use a composite video (yellow) cable to connect the
VIDEO (CVBS) socket on this recorder to the
VIDEO IN socket on your TV.
D Use an audio cable (red/white) to connect the
OUT2 -AUDIO LR sockets on this recorder to
the AUDIO IN sockets on your TV.
E Plug in the power cable from the recorder to an AC
power outlet.
Note See the accompanying user manual for other
possible connections (e.g. HDMI, Component Video,
S-VIDEO)
2
Set up
A
Finding the viewing channel
A Press STANDBY-ON on the recorder.
The recorder will display ‘IS TV ON?’.
B Switch on the TV.
You should see the { EASY SETUP } menu.
C If not, press the Channel Down button on the TV’s
remote control repeatedly (or AV, SELECT,
°
button) until you see the menu. This is the correct
viewing channel for the recorder.
B
Start basic setup
Use the recorder’s remote control and follow the on-
screen instructions to complete the installation.
A Select the desired menu language, your country and
the TV shape.
Note Select { Done } in the menu and press
to go
to the next screen.
B Activate automatic channel search.
This will take a few minutes to complete.
CHANNEL SEARCH
Automatic Channel search will find and store all channels.
Make sure to connect the antenna.
Channel Search
Skip Search
Start
OK
Note For Australia only, activate automatic channel
search for analogue and digital tuner/radio.
C Check the date and time and press .
D Select { Do not install now } in the menu and press
to complete the basic setup.
Easy setup completed. Continue with the GUIDE Plus+
installation?
Continue
Donot install now
OK
OK
Disc tray will not open until setup is completed
Note Do not continue with the GUIDE Plus+
installation as this feature is not available at your area.
E Wait until the recorder has finished initialising the
system, then press again.
Watch TV – Pause live TV
Your Philips Recorder allows you to control the TV
programme. You can PAUSE it as if you were in control
of the live broadcast.
A Turn on your recorder and press TUNER to switch
between analogue and digital tuner, then press
CH +/- to select a TV programme.
B Press PAUSE to suspend it.
C Press PLAY to continue.
Note When the recorder is turned on, the
programme you are watching will be stored in the
temporary hard disk storage. When you switch the
recorder to another input signal (e.g. CAM) or to
standby mode, the programme will be erased.
D Press TUNER to return to the live broadcast.
Help text information bar
The help text bar located at the bottom of the screen is
providing the information on:
l remote control keys that can be used at the current
state.
l brief information of the selected item.
3
Enjoy
Select a Basic Connection
Note: Option 2 connection is only applicable for Australia
only.
Option 1: Connecting
A
VIDEO IN
(CVBS)
CD
B
E
Option 2: Connecting (with digital
terrestrial antenna - Australia only)
VIDEO IN
(CVBS)
C
D
F
E
2a
2b
1b
1a
Before Connecting
If you have an indoor DVB-T antenna, follow steps
1a
and
2a
.
1a
Plug in the off-air antenna cable to the socket on
this recorder.
2a
Connect the indoor DVB-T antenna cable to the
ANTENNA socket on this recorder.
If you only have a single off-air antenna, follow steps
1b
and
2b
.
1b
Use the supplied Tuner interlink cable to connect
the two ‘A’-sockets on this recorder.
2b
Plug in the off-air antenna cable to the ANTENNA
socket on this recorder.
C Use the supplied RF coaxial cable to connect the
TV socket on this recorder to the Antenna In
socket on the TV.
D Use a composite video (yellow) cable to connect the
VIDEO (CVBS) socket on this recorder to the
VIDEO IN socket on your TV.
E Use an audio cable (red/white) to connect the
OUT2 -AUDIO LR sockets on this recorder to
the AUDIO IN sockets on your TV.
F Plug in the power cable from the recorder to an AC
power outlet.
Television (rear)
Television (rear)
From an
off-air antenna
or cable box
off-air
antenna
DVB-T
antenna
off-air
antenna
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVDR9000H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR9000H in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR9000H

Philips DVDR9000H User Manual - English - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info