1055
116
Zoom out
Zoom in
Previous page
1/120
Next page
106
PROBLEM SOLUTION
The wrong TV channel
was decoded (entered)
after you programmed
a recording using
VIDEO Plus+ System.
bThe programme number of the TV channel is not available in the GUIDE Plus+
®
system or
allocation is wrong.
To change or check the channel data, proceed as follows:
1 Press GUIDE/TV .
2 Press P+ A .
3 Select 'Editor' with C .
4 Select the TV channel using P- B or P+ A .
5 Press C to go to the right tile.
In case you can receive the selected channel only via an external receiver, press the red
button to select the corresponding source.
6 Press the green button.
7 Enter the programme number of the TV channel using the number buttons.
If the source you have selected is an external receiver, enter the programme number that
you would also enter at the external receiver for this TV channel.
8 Confirm with OK .
There is no channel
overview in the GUIDE
Plus+
®
system
bDVD recorder is switched on: Switch off the DVD recorder to allow data transfer
bThe TV channel that transmits the GUIDE Plus+
®
data is not set properly.
bExternal receiver (satellite receiver, set-top box, cable TV box, ...) (if available) is switched off:
switch on the external receiver
bG-LINK cable is not connected: Connect the G-LINK cable and make the necessary settings to
control the external receiver (see chapter 'The GUIDE Plus+
®
system', section 'Installation of the
'External receiver 1'').
Missing or wrong TV
channel in the 'Grid'
screen
bWrong local post code/country was entered
bPlease check your correct channel line up in the 'Grid' screen.
Read therefore the section 'The 'Editor' screen.
When you press
GUIDE/TV the GUIDE
Plus+
®
setup screen will
appear
bThe GUIDE Plus+
®
system was not completely installed or local post code was not entered.
1 Check the settings
2 Select the corresponding line using P- B or P+ A and confirm with OK .
3 For more information on the individual functions, see chapter 'The GUIDE Plus+
®
system',
section 'Installation of the 'External receiver 1''.
The external receiver
does not always react
to Remote control
signal.
bThe Infrared (IR) Remote control signal interfere with the IR signal of the G-LINK transmitter.
Put the G-LINK transmitter closer to the front of the external receiver.
My external receiver
switches automatically
through the TV
channels
bIf the DVD-Recorder is switched off ( STANDBY m button) the external receiver will be used
from the GUIDE Plus+
®
system via the DVD-Recorder. If you want to watch TV-Channels from
the external receiver, you have to switch the DVD-Recorder on.
There is picture or
sound interference on
TV reception:
bBefore recording, select the recording mode as described in chapter 'Manual Recording', section
'Selecting the recording mode (quality)'.
bHave your aerial checked.
bYou will find information on how to change the TV system in 'Manual TV channel search' in
'Installing your DVD recorder'.
Before you call an engineer
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVDR80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR80 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR80

Philips DVDR80 User Manual - German - 124 pages

Philips DVDR80 User Manual - Dutch - 126 pages

Philips DVDR80 User Manual - Spanish - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info