666440
2
Zoom out
Zoom in
Previous page
1/9
Next page
General
- The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Display
Battery status indications
- When the battery is almost empty, the battery
charge indicator ashes orange (Fig. 3).
- When the appliance is charging, the battery
charge indicator ashes white (Fig. 4).
- When the battery is fully charged, the battery
charge indicator lights up white continuously
(Fig. 5).
Note: The lights switch o automatically after
30 minutes.
Hair length indications
The selected hair length setting will show above
the zoom wheel when you select the desired
length setting with the zoom wheel (Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the appliance
before you use it for the rst time and when the
display indicates that the battery is almost empty.
1 Make sure the appliance is switched o.
2 Put the adapter in the wall socket and put the
small plug in the appliance (Fig. 7).
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 60 minutes.
Using the appliance
Note: This appliance can be used without cord or
directly from the power outlet.
You can use this appliance for a stubble and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less mess trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch o and clean the appliance after
each use.
Switching the appliance on and o
Press the on/o button once to switch the
appliance on or o (Fig. 8).
Trimming without comb
- You can use the appliance without beard and
stubble comb to trim hair close to the skin or
to contour the neckline and sideburns. To trim
hair close to the skin, place the at side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9).
- You can use the precision trimmer to create
ne lines and contours around your facial style,
close to the skin (Fig. 10). Simply pull the cutting
element straight o (Fig. 11) and insert the
precision trimmer (Fig. 12).
- For contouring hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 13).
Trimming with comb
You can use the beard and stubble comb attached
to the cutting element to groom your beard and
moustache in your preferred style. You can choose
from 20 length settings ranging from 0.5mm to
10mm in steps of 0.5mm.
1 Attach the comb onto the appliance (Fig. 14).
2 Turn the zoom wheel to select the desired
length setting (Fig. 6).
Note: When you trim for the rst time, start at the
highest length setting to familiarise yourself with
the appliance.
3 Switch on the appliance.
4 To trim most eectively, move the appliance
against the hair growth direction. Make sure that
the surface of the comb always stays in contact
with the skin (Fig. 15).
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1 Switch o the appliance and disconnect it from
the power outlet.
2
Wipe the housing of the appliance with a dry
cloth.
3
Remove the comb (Fig. 16) and clean it with the
cleaning brush and/or rinse it under the tap (Fig.
17).
4 Remove the cutting element and clean it under
the tap (Fig. 18). Shake o excess water and
leave to dry completely.
Caution: Never dry the cutting element
with a towel or tissue, as this may
damage the trimming teeth.
5 Shake and/or brush out the hairs that have
collected in the hair chamber (Fig. 19).
6 After cleaning, reattach the cutting element
(Fig. 20) and comb (Fig. 14) to the appliance.
Recycling
- This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU) (Fig. 21).
- This symbol means that this product contains a
built-in rechargeable battery which shall not be
disposed of with normal household waste (Fig. 22)
(2006/66/EC). We strongly advise you to take
your product to an ocial collection point or
a Philips service centre to have a professional
remove the rechargeable battery.
- Follow your country’s rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaet.
SUOMI
Laitteen osat (kuva 1)
1 Teräyksikkö
2 Imujärjestelmä
3 Pituuden asetukset
4 Zoomausrengas
5 Virtapainike
6 Akun latauksen ilmaisin
7 Puhdistusharja
8 Pieni liitin
9 Virtalähde (verkkolaite)
10 Tarkkuustrimmeri
11 Parta- ja sänkikampa
Tärkeitä turvallisuustietoja
Lue nämä tärkeät tiedot
huolellisesti ennen laitteen
ja sen lisäosien ensimmäistä
käyttökertaa ja säilytä ne
myöhempää käyttöä varten.
Toimitukseen sisältyvät
lisäosat voivat vaihdella
tuotekohtaisesti.
Vaara
- Suojaa virtalähde
kosteudelta (kuva 2).
Varoitus
- Virtalähteessä on
jännitemuuntaja.
Älä katkaise virtalähteen
johtoa ja vaihda siihen
toista pistoketta, koska tämä
aiheuttaa vaaratilanteen.
- Käytä laitteen lataamiseen
vain mukana toimitettua
virtalähdettä (HQ8505).
- Laitetta voivat käyttää
myös yli 8-vuotiaat lapset
ja henkilöt, joiden fyysinen
tai henkinen toimintakyky
on rajoittunut tai joilla ei
ole kokemusta tai tietoa
laitteen käytöstä, jos
heitä on neuvottu laitteen
turvallisesta käytöstä tai
tarjolla on turvallisen käytön
edellyttämä valvonta ja jos
he ymmärtävät laitteeseen
liittyvät vaarat. Lasten ei pidä
leikkiä laitteella. Lasten ei saa
antaa puhdistaa tai huoltaa
laitetta ilman valvontaa.
- Tarkista laite aina ennen
kuin käytät sitä. Älä
käytä laitetta, jos se on
vaurioitunut,
koska sen käyttö saattaa
tällöin aiheuttaa vammoja.
Vaihda vahingoittuneen
osan tilalle aina alkuperäisen
tyyppinen osa.
- Älä avaa laitetta akun
vaihtamista varten.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BT7201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BT7201 in the language / languages: English, Danish, Swedish, Finnish, Finnish as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips BT7201

Philips BT7201 User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info