776074
38
Zoom out
Zoom in
Previous page
1/42
Next page
- 38 -
VIDEO DISPLAY
I lose connection to the
app frequently� What is
the matter?
Check if the status light turns green� Check if the Wi-Fi signal in the room
where the baby monitor is placed is strong enough and stable� If this is
not the case, you need a Wi-Fi repeater to get a strong and stable signal.
If you use a Wi-Fi repeater, make sure that your router and your Wi-Fi
repeater have the same SSID and that you use the same password for the
router and the repeater
If the status light on the front of the baby monitor is solid white and
you keep losing connection, there may be a problem with the Internet
connection of your router, smart device or baby monitor. Check the Wi-Fi
signal on your smart device or the 3G or 4G speed by trying to watch a
movie, e.g. on YouTube. Or reset your Wi-Fi router.
Perhaps you have activated the privacy function, check the status light of
the baby unit, if it is green, the privacy function is on. Disable it when you
need to resume app reviewing�
APP /SET UP
Problem Solution
I cannot set up the baby
monitor� Each time I end
up in the connection
error screen� What is the
matter?
Make sure your smart device uses the same Wi-Fi network you want to
connect the baby monitor to�
Check the status light of the baby unit, if it is ashing red, the Wi-Fi
password entered was wrong� Restart the set up process� Re-enter the
Wi-Fi password and make sure that the password is correct�
Perhaps the router SSID (the network name) or the password contains
special symbols. If it does, change the name of your router SSID or the
password accordingly�
If the status light turns solid red while trying to connect, the baby
monitor successfully connected to the router but fails to connect to the
internet� Then check if you have access to 2�4GHz Wi-Fi by trying to access
other apps like YouTube, Facebook etc. If other apps do not respond,
please make sure you have internet access. If there is internet access, the
server could be temporarily unavailable� Please try to set up again later
Perhaps you have been tying to connect the baby monitor to a 5GHz
network�
Please check that you have chosen a SSID of a network that supports
2.4GHz.
I have problems making
my baby monitor read
the Wi-Fi QR code on my
smart device� What can
I do?
Make sure that you hold the QR code at approx. 5-15 cm / 2-6 inch
distance from the baby monitor lens� Try moving the smart device slightly
up, down, left or right to ensure the QR code is directly in front of the
baby monitor lens� You can also try moving the smart device closer to or
further away from the baby monitor lens to allow proper focussing� Make
sure that there is enough light in the room, but avoid too bright light.
When the baby monitor has read the QR code, you hear a conrmation
sound and the status light of the baby unit turns white�
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD923 in the language / languages: English as an attachment in your email.

The manual is 6.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Avent SCD923

Philips-Avent SCD923 User Manual - German - 45 pages

Philips-Avent SCD923 User Manual - Dutch - 43 pages

Philips-Avent SCD923 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info