507146
13
Zoom out
Zoom in
Previous page
1/168
Next page
2 Select the desired microphone sensitivity level for the baby unit by pressing the – and +
buttons and conrm by pressing the OK button.
one light on = minimum sensitivity level
all lights on = maximum sensitivity level
Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and
therefore transmits more often. As a result, the units consume more power.
Sound alert on/off
If the sound alert is switched on, the parent unit beeps as soon as the fth sound level light lights up
blue while the volume is switched off.
1 Select X by pressing the – and + buttons and conrm by pressing the OK
button.
2 Select C or V and conrm by pressing the OK button.
Setting room temperature range
You can set the temperature range (minimum and maximum temperature) for your baby’s room.
1 Select B– – ° by pressing the – and + buttons and conrm by pressing
the OK button.
N appears on the display.
2 Conrm by pressing the OK button.
3 Set the desired minimum temperature by pressing the – and + buttons and conrm by
pressing the OK button.
4 Set the desired maximum temperature by pressing the – and + buttons and conrm by
pressing the OK button.
Note: When the maximum temperature selected is lower than the room temperature, the unit consumes
more power because the display is on continuously. This is also the case when the minimum temperature
set is higher than the room temperature.
Temperature alert on/off
If the temperature alert is switched on, the parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops below the set minimum temperature. If no
minimum and maximum temperatures have been set, the temperature alert goes off when the
room temperature drops below 7°C or rises above 33°C.
1 Select B– – ° by pressing the – and + buttons and conrm by pressing
the OK button.
2 Select M by pressing the – and + buttons and conrm by pressing the OK
button.
3 Select C or V and conrm by pressing the OK button.
Cleaning and maintenance
Do not immerse the parent unit and the baby unit in water and do not clean them under the tap.
Do not use a cleaning spray and/or liquid cleaners.
1 Unplug the baby unit if it is connected to the mains and take the parent unit out of the
charger.
2 Clean the parent unit and the baby unit with a damp cloth.
,
,
,
ENGLISH 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD499 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD499 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info