145527
4
Zoom out
Zoom in
Previous page
1/39
Next page
4
Preparation
Surround loudspeakers
There are two surround loudspeakers supplied. One is the active loudspeaker,
including the RF receiver, a power switch, the mains supply, a channel selector,
a red and black connector clip and a left/right surround loudspeaker switch.
The other loudspeaker is a passive one which has to be connected with the
active loudspeaker with the supplied speaker cable.
Set the slide channel switch 1 at the bottom of the active loudspeaker to
channel 1. (In the factory channel 1 has been chosen as the default channel.)
See also Sound Setup, p. 10.
Connect the active to the passive loudspeaker with the supplied speaker
cable 2.
Push the connector clip down, insert one end of the colour coded wire into
the opening of one connector clip and push it up again. Insert the other end
of the same colour coded wire in the same colour connector clip of the
other loudspeaker. Do the same with the other wire in the other connector
clips. Do not insert the wires too far.
The Surround sound loudspeakers should always be located behind or to
either side of the listener. If preferred you can also hang the loudspeakers on
the wall.
The maximum distance between the TV and the surround speakers should
not exceed 15 m.
Note: people moving around close to the TV may interfere with the sound
transmission.
Set the slide switch 3 to the right if the active loudspeaker is positioned to
the right side of the listener, to the left if it is positioned to the left side of
the listener (seen from the point of view of watching the TV).
Connect the active loudspeaker to the mains with the mains cable 4.
Switch on the active loudspeaker with the POWER switch 5.
The red LED at the front of the active surround speaker shows that the
speaker is in standby.
During sound transmission the indicator turns to green and back to red after
10-15 min. after the TV has been switched off.
To switch the active speaker off, use the
POWER switch.
( Insert the mains plug of the TV in the wall socket having a mains voltage
of 220V-240V.
To prevent damaging the mains (AC) cord which could cause a fire or electric
shock, do not place the TV on the cord.
§ Switch the TV on : Press the power switch A on the front of your TV.
A green indicator on the front of the TV lights up and the screen comes on.
If the indicator is red, press the
-P+
keys on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
LANGUAGE
automatically appears on the screen. The explanation appears in different languages
one at a time. Choose your own language and press the OK key on the remote
control.
5
1
4955.1 gb /05 18-01-2000 10:12 Page 4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 36pw9765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 36pw9765 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info