52910
18
Zoom out
Zoom in
Previous page
1/21
Next page
17
Troubleshooting Tips
Below is a list of symptoms you may encounter with your TV. Before you call for service, make these
simple checks.
Symptom Possible Causes What you should do
No display on screen Faulty power supply Check whether power cord is properly connected
TV’s Power not turned into the mains socket and to your TV. If there is still
no power,
on disconnect plug. Wait for 60 seconds
and re-insert plug. Switch on TV again.
Press the
key on the remote control.
Poor reception Faulty antenna connection Check antenna connection at rear of TV.
(snowish picture and
Weak transmission Try manually adjusting your picture (refer to page 8).
noise
Wrong TV system
Have you chosen the right TV system? (refer to page
8).
No picture Faulty aerial and cable Check whether euroconnector cables or aerial
sockets are properly connected.
Wrong source selected Check whether the source is correctly selected.
Press button to enter Source list and select
the correct source.
No sound on Wrong TV system Check whether the correct TV system is selected
certain channels (refer to page 8).
No sound Zero volume level Try increasing volume.
Sound muted Check that the mute ( ) mode is not on. If mute
mode is on, press the key to deactivate mute
mode.
Aim remote control directly at sensor on front of TV.
Headphone is connected Disconnect headphone connection.
Sound interference • Electrical appliances Try switching off any electrical appliances, for
interference example, hairdryer, vacuum cleaner that are in use.
Unable to understand • Wrong language selected
Press the key to exit menu from screen. Press
the language on accidently
the key to enter main menu. Use the
ï
key
screen to operate set to
select the fourth item on the main menu. Use
Æ
/
key to enter into the next menu level and
the
Í Æ
key to
select correct language.
TV not responding
Wrong placement of
Check the placement of the batteries.
to remote control
batteries
Flat batteries Try changing the batteries.
Occasional appearance
Characteristic of liquid This symptom is not a problem. The liquid crystal
of red, blue, green crystal panel panel is built with very high precision technology
and black spots on giving you the fine picture details. Occasionally, a few
screen non-active pixels may appear on the screen as a fixed
point of red, blue, green or black. Note that this
does not affect the performance of the set.
Intermittent or * HDCP (see glossary) Noise is displayed if the connected digital equipment’s
flickering picture on authentication failed (DVD player or Set-Top box) *HDCP authentication
in HD mode failed. Check user manual for the digital equipment
you are connecting.
• Use a standard HDMI to DVI cable.
No sound or picture but
Set on standby mode Press the
key on the remote control.
front panel red light is
on
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 26PF4311S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 26PF4311S in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info