140158
44
Zoom out
Zoom in
Previous page
1/47
Next page
44
TROUBLESHOOTING TIPS
No Power
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Check that the outlet is not on a wall switch.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
Check antenna/cable connections. Are they properly secured
to the TV's ANT 75 plug?
Check the TUNER MODE control for the correct tuner set-
ting.
•Try running the Auto Program feature to find all available
channels.
Press the SOURCE button on the remote to make sure the
correct signal source is selected.
If using an accessory device, be sure that it is functioning
properly.
If in PC Mode, a video signal MUST BE present or the TV
will turn off.
No Sound
Check the VOLUME buttons.
Check the MUTE button on the remote control.
If you’re attempting to hook up auxiliary equipment, check
the audio jack connections.
TV Only Produces MONO Sound
If using a cable box with RF only type connections, the signal
coming from the cable box will be produced in MONO only.
Check Sound control setting. Change setting to Stereo.
Remote Does Not Work
Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
Clean the remote control and the remote control sensor win-
dow on the TV.
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
Check to be sure the TV outlet is not on a wall switch.
Be sure that the remote is in the correct operating mode.
Be sure the remote is pointed at the Remote Sensor Window
on the TV. See page 1 of the Quick Use Guide for details.
TV Displays Wrong Channel or No Channels Above 13
Repeat channel selection.
Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
• If S-VHS is disconnected, picture color will become faint.
To restore picture color, press the CH +/– button on the
remote control and do a channel up followed by a
channel down.
S-VHS color becomes faint
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 23 pf 9966 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 23 pf 9966 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info