33199
8
Zoom out
Zoom in
Previous page
1/12
Next page
6
1 Insert a cassette.
2 Use the
P p
button to select the programme number
from which you wish to record, e.g.: ’P 01’ .
3 Press the
RECORD n
button.
4 Use the
STOP h
button to stop the recording.
5 If, whilst recording, you want to switch off the TV screen,
press the
STANDBY m
button once.
To switch the TV screen on again, press the
P p
button.
Important notes for recoding
OTR: If you do not want to record to the end of the
cassette, press the
RECORD n
button again. The display
shows at what time the recording will stop.
With the
D
or the
C
button you can change the
end time of the recording in 30 minute intervals.
If you wish to cancel the end time, press the
CLEAR
button. This does not effect the recording.
Programme number ’E1’ is provided for recording from
external sources (via the
EXTERNAL
scart socket).
Programme number ’AV’ is provided for recording from
external sources (via the front socket).
Erase protection: So that you don’t accidentally delete an
important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette with
a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive tape
or slide the special tab to the right.
Auto-assembling: You can use the auto-assembling func-
tion to join individual recordings without any major
picture disturbance between the recordings.
Search for the correct position on the tape and then stop
the playback by pressing the
STOP h
button. ’PAUSE’
appears in the display.
Now start recording as usual by pressing the
RECORD n
button.
Long play: Before recording, press the
MENU
button.
Select and confirm the ’SPECIAL’ line.
Select and confirm the ’TAPE SPEED’ line.
Select the ’LP’ (=LongPlay) recording speed and stop by
pressing the
MENU
button.
During playback the TV Combi will automatically select
the correct playback speed.
Programme a recording
The set needs the following information for every pro-
grammed recording:
* the date on which the recording is to be made
* the programme number for the TV channel
* the start and end time of the recording
* VPS/PDC on or off
The set stores all the information mentioned above in what is
known as a TIMER block. It can store 6 TIMER blocks for up
to one month in advance.
’VPS’ (Video Programming System)/ ’PDC’
(Programme Delivery Control)
With ’VPS/PDC’, the TV station controls the start and the
duration of a programmed recording. This means that the
video recorder switches itself on and off at the right time
even if a TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the ’VPS/PDC’ time. If,
however, a different ’VPS/PDC’ time is given, e.g.: ’20.15
(VPS/PDC 20.14)’, you have to enter ’20.14’ (the ’VPS/PDC’
time) exactly to the minute.
If you are not using ’VPS/PDC’, the ’VPS/PDC’ indication must
be off.
3. RECORD
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 20PV184 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 20PV184 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 20PV184

Philips 20PV184 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info