297449
36
Zoom out
Zoom in
Previous page
1/38
Next page
Depart. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-P162
Page : 36 of 38
Langue : EN
Date : 08/02/05
© PHILIPS ELECTRONICS N.V. 1999 VY-V-640-P330
All rights reserved. Reproduction in whole
10.0 SOLUTIONS IN CASE OF PROBLEMS DURING THE TESTS
Under no circumstances the phon to be disassembled to fix a defect detected du e test procedure on
level 1.
10.1 The phone does not switch on.
- Check the tactile feeling of the “ON/OFF” button.
- Check the LCD Fonction
- Active the ON/OFF Buttom Clamshell
- Remove the battery. Check that both the connectors of the phone and those of the battery are not damaged.
- Clean the connectors.
- Plug the battery again, making sure that it is securely fitted. Charge the mobile until the icon has stopped flashing.
Then unplug from the charger and attempt to switch the mobile on.
If it still does not switch on. If the failure can’t be found out then dismantle the product and swap the board.
10.2 Charge does not start or no detection of the charger. (refer to chapter 8.3)
- Check the charger contacts for dust or missing pins.
- Check the mobile connector.
- Remove the battery. Check that both the connectors of the phone and those of the battery are not damaged.
- Check the charger individually with a reference mobile. I arger works prop rge the customer
mobile with a reference battery.
If neither of the battery and the charger can be incriminated, dismantle the mobile change the battery connector. If
the problem remains, swap the board.
10.3 The display shows “No SIM card. Please insert your SIM card.” or “SIM FAILURE”
- If the SIM card cannot be inserted, check for any foreign part and try to remove it.
- Check the SIM Card connector. All the contacts must be at the same level. Make sure that there is no dust on the
connector contacts and the SIM card contacts.
- If the test SIM card can be detected but the message “SIM Failure” remains on the customer’s card, his card must
be damaged. Ask him to contact his network op
Otherwise dismantle the product change the Simcard connector. If the problem remains, swap the board.
10.4 Display problems
Contrast, icons and matrix of the display can be ed with t SIM card by pressing keys ”5”.
If everything works in test configuration that means that a phone setting is disabled or does not suit well. It can be
solved in the phone menu.
wap
e have ring th
f the ch erly try to cha
erator.
check the tes
Otherwise dismantle the product change the Module LCD. If with a new Module LCD the problem remains, s
the board.
or in part is prohibited without the written
consent of the copyright owner.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 162 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info