If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
Information
DVD / VCR
PROBLEMCORRECTIVE ACTION
No power.• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond
to the remote control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you con rm infrared light through the
digital camera.
Poor picture or noise.• Interference signal may be received. Change the position and orientation of the unit.
VCR
Timer recording is impos-
sible.
• Make sure the Timer Recording is set correctly.
• Make sure TIMER indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record
mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR SOURCE light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing [CHANNEL L/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.
Cannot view a tape but the
audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback picture.• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen
normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press [VCR].
•
Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR SOURCE light is lit, then set it to the TV position by pressing [VCR].
Video or color fades in and
out when making a copy of
a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
DVD
No picture.• Connect the video cable rmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD SOURCE light is lit. Then try other DVD features.
Disc cannot be played.• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have ngerprints, scratches, or dusts on its surface.
No sound.• Connect the audio cables rmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output• This unit does not support DTS audio.
-This is not a malfunction.
Distorted picture.• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from di erent camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears on
the screen, prohibiting an
operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
3 Select the desired PLAYER
MENU Language, using
the number buttons.
Hint
• If you do not wish to
initialize at step 2,
press [SETUP] to exit
the menu.
<SETUP MENU>
Press
twice.
S
ETUP
STOP
ENTER
ENTER
ENTER
ENTER
INITIALIZE_INITIALIZE
INITIALIZEYES
ENGLISH
FRENCH
SPANISH
SELECT MENU LANGUAGE
1
2
3
2 Select “INITIALIZE”.
Reset to the Default Setting (Except for PARENTAL Setting)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Philco CDV210HH8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Philco CDV210HH8 in the language / languages: English as an attachment in your email.
The manual is 7,65 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
