479064
39
Zoom out
Zoom in
Previous page
1/40
Next page
Move
the
zipper
foot
to
the
left
as
far
as
it
will
go.
Press
the
edges
of
the
placket.
Baste
the
closed
zip
to
the
right
edge
of
the
placket
on
the
wrong
side
so
that
its
teeth
are
still
visible.
Pin
facing
strip
A
to
the
underside
and
stitch
it
down
at
the
same
time
as
you
sew
the
zip.
The
zip
teeth
run
along
the
right
guiding
edge
of
the
foot
(Fig.
1).
Shortly
before
the
end
o
the
seam
leave
the
needle
down
in
the
fabric,
raise
the
zipper
foot,
open
the
zip.
lower
the
zipper
foot
again
and
finish
sewing
the
seam.
Close
the
zip.
Pin
the
overlapping
edge
along
the
intended
seam
line.
Baste
left
zip
edge
(Fig.
2).
Open
zip.
Attach
the
edge
guide
and
position
it
for
the
desired
seam
margin
so
that
it
moves
along
the
edge
of
the
fabric
(Fig.
3).
Shortly
before
the
end
of
the
seam
leave
the
needle
down
in
the
fabric,
raise
the
zipper
foot
and
close
the
zip.
Lower
the
zipper
foot
and
finish
sewing
the
seam.
Secure
the
end
of
the
zip
seam
with
a
bartack.
Useful
hint
If
the
zip
sticks
after
cleaning
we
recom
mend
you
rub
the
teeth
with
a
wax
candle
or
piece
of
soap.
This
makes
the
zip
easier
to
open
and
to
close.
Zip
closure
in
ladies’
slacks
D
4
—0
10
39


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-tiptronic-1029

Reset search

  • HI, can someone please help with steps of how to rethread the bobbin using the pfaff tiptornic 1029 model? Thanks in advance Submitted on 24-8-2020 at 01:20

    Reply Report abuse
    • On the right side of the machine you can put the empty bobbin on the little black hole and then slide it to the right with the machine threaded you can take the thread and loop it around the little silver button on the left side of the bobbin holding tray and then put the thread down into your bobbin. on the turn wheel on the right turn the centre knob so it disconnects the needle from going up And down then just press the foot pedal and it will fill the bobbin Answered on 17-9-2021 at 20:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Tiptronic 1029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Tiptronic 1029 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Tiptronic 1029

Pfaff Tiptronic 1029 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info