750008
42
Zoom out
Zoom in
Previous page
1/44
Next page
42 –MACHINE MAINTENANCE
Irregular Stitches
Possible Cause: Stitches are not balanced.
Solution: Adjust thread tensions and possibly cutting width (page 26, 27)
Possible Cause: Thread is not unreeling smoothly off the thread spool.
Solution: Check the thread spool to ensure thread is not getting caught.
Possible Cause: Machine may not be threaded correctly or threads threaded in the incorrect sequence.
Solution: Check that machine is threaded in correct order as shown in machine manual (page 12)
Fabric Jams
Possible Cause: Upper and lower fabric cutters are not in proper position.
Solution: Check alignment of cutters (page 26).
Possible Cause: Thread is not unreeling smoothly off the thread spool.
Solution: Check the thread spool to ensure thread is not getting caught.
Possible Cause: Too much fabric thickness.
Solution:Compress thick layers with conventional sewing machine before sewing on overlock.
The Looper Threader does not Work
Possible Cause: The Threading/Sewing switch is not set to the “Threading” position.
Solution: Set the Threading/Sewing switch to threading position (page 15, 17).
Possible Cause: The looper selection lever is not set correctly.
Solution: Make sure the looper selection lever is pointing to the correct looper (page 15, 17).
Possible Cause: The thread is not correctly inserted into the looper threader hole.
Solution:Insert at least 2cm of thread into the looper hole (page 15, 17).
Possible Cause: The thread is not long enough.
Solution:Pull out approximately 12” (30 cm) of thread before putting it in the looper threading hole (page 15, 17).
Possible Cause: The thread is tangled, wet or frayed.
Solution:Trim the thread end.
Possible Cause: Lint is accumulated in the looper threader pipe.
Solution:Clean the looper threading pipe (page 38).
The Needle Threader does not Work
Possible Cause: The mark on the side cover is not aligned with the mark on the handwheel.
Solution: Set the handwheel in threading position (page 8, 15, 17).
Possible Cause: The needle threader switch is not set correctly.
Solution: Set the needle threader switch to R when threading the right needle and L when threading the left
needle (page 24).
Possible Cause: The needle threader is not used correctly.
Solution:See page 24 for instructions on how to use the needle threader.
Specications
Sewing Speed
Maximum 1300 rpm
Number of Needles/Needles
1-2 of type HAx1SP, size: #11-14
Stitch Length
1-5 mm
Stitch Width
3.3-7.5 mm
Number of Threads
2, 3, 4
Differential Feed Ratio
0.5-2.0
Type of Lamp
LED light
Needle Bar Stroke
26.5 mm
Machine Dimensions
Width: 351 mm
Depth: 284 mm
Height: 299 mm
Presser Foot Rise
5-7 mm
Weight
7.8 kg
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Admire Air 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Admire Air 5000 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Admire Air 5000

Pfaff Admire Air 5000 User Manual - German - 44 pages

Pfaff Admire Air 5000 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info