770997

Petsafe PWW00-14898 Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
98
1) Remove the pump from the fountain as explained in the Filters and
Fountain Cleaning section (Steps 6 & 7).
2) Remove the faceplate by using your thumb and forefinger to gently
squeeze on both sides of the plate and pull off. It may be necessary to
insert a fingernail or other slim object into the seam of the faceplate to
pry it off.
3) Next, remove the stator by placing your fingernail underneath the small
lip located on the narrow side of teardrop-shaped stator (Fig. 12) and
pull out to remove (Fig. 13).
Cleaning the pump is essential to the longevity of the fountain as well as the
cleanliness of the water. Clean the pump every 2 weeks.
Pump Maintenance
(Model: SP400-LV)
Pump Impeller
Stator
Faceplate
Stator Pull-Tab
Fig. 12 Fig. 13
4) Once the stator is removed, remove the impeller (3 bladed propeller).
The impeller is held in place by a magnet, simply insert a fingernail or
other slim object underneath the plastic blade and lift out (Fig. 14, Pg 9).
1) Place the pump inside the foam
filter (Fig. 1, Pg 3) then place
inside the square indention.
Make sure the circular opening
on top of the pump is positioned
in the bottom left corner (Fig.
16). Press down on the pump to
engage the suction cups. Once
the pump is securely in place,
feed the cord over and through
the raised post and out the notch
on the bottom side of the bowl
(Fig. 17, Pg 10).
5) Once the pump is completely disassembled, you can clean the parts
with soap and warm water. Use a cotton swab or bottle brush to
get inside the pump’s cavity and remove any build up (Fig. 15). For
added disinfecting and/or hard water removal, clean the pump with
white vinegar.
6) Once the parts are clean and well rinsed, you can reassemble the
pump for use.
a) Replace the impeller
b) Replace the stator
c) Replace the intake plate
Pump Maintenance
(Model: SP400-LV)
Fig. 14 Fig. 15
Fountain Reassembly
Pump
Outflow
Fig. 16
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PWW00-14898 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PWW00-14898 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info