770995

Petsafe PWW00-14289 Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
1110
4) Once the filter is rinsed off, place inside the filter housing case with
the larger side facing down. The filter will only fit inside the case one
way, if it does not fit, flip it over. Attach the lid to the filter housing
case, press down until you hear it snap in place.
5) Attach the filter housing case to the pump by inserting the raised notch
inside the circular opening on top of the pump (Fig. 18). The opening
on top of the filter case should be right next to the raised post.
Fountain Reassembly
Fig. 17
2) Once the extra slack is
removed from the cord, affix
the rubber cap over the post to
seal off the bowl.
3) Rinse a new charcoal filter
thoroughly in cold water to help
remove any excess and loose
charcoal dust.
Fig. 19
Fig. 18
6) Reinsert the rubber grommet into the circular opening at the top of the
tower. Place it inside the hole and then gently work the piece into the
hole so that the top edge rests flat inside the dish. This will create a
seal between the filter housing case and the tower (Fig. 19).
7) Align the tower with the
rectangular indentation inside
the bowl and carefully lower it
until it rests flat (Fig. 20).
Fig. 20 a) Clean the pump more frequently
b) Clean with regular white vinegar
and let the vinegar soak for
several minutes down inside the
pump’s cavity
c) Use bottled water
Living in a humid environment, you may experience problems with mold or
algae, making the fountain feel slimy. Simply soak all of the plastic parts
(excluding the pump) in a diluted bleach solution for about ten minutes after
regular cleaning. We recommend using a mixture of 10% bleach and 90%
water. Pour some of the bleach solution inside the pump’s cavity as well
for additional disinfecting. Be sure to rinse all the parts very thoroughly
to remove all the chlorine. The best way to rinse out the pump’s cavity is
to hold it under a weak stream of water. Cleaning the fountain parts with a
bleach solution is also a great way to disinfect.
If hard water is an issue where you live, you may see white mineral
deposits inside the housing and inside the pump. These mineral deposits
may eventually prevent the impeller from turning properly. To avoid having
to replace the pump:
8) Place the fountain in a desired location. If placing on carpet,
tile or wood flooring, use a protective mat or other durable,
water resistant surface. This will help protect your floor from any
splashing or spills caused by your pet.
9) Fill the fountain by pouring water directly into the bowl. Leave at
least a half inch (1.27 cm) of space between the water level and the
rim of the bowl to help control spills and splashing.
10) Make sure the cord, the adaptor and your hands are completely dry
before you plug the fountain in. Connect the inline plug and make sure
no silver is showing, then plug the adaptor into an electrical outlet.
The Fountain and
Your Environment
Fountain Reassembly
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PWW00-14289 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PWW00-14289 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info