770959
3
Zoom out
Zoom in
Previous page
1/49
Next page
3
DEITNL
ES
FR
EN
Accessories available online
Thank you for choosing the PetSafe
®
Brand. You and your pet deserve a
companionship that includes memorable moments and a shared understanding
together. Our products and training tools enhance the relationship between
pets and their owners. If you have any questions about our products
or training your pet, please visit our website at www.petsafe.com
or contact our Customer Care Centre. For a listing of Customer Care
Centre telephone numbers, visit our website at www.petsafe.com.
Programming Cats into the PetSafe®
Microchip Cat Flap
Your PetSafe® Microchip Cat Flap is designed to work with most 15-digit
microchips (FDX-B) used for pets. Before you begin setup or installation of the
cat flap, please ensure your cat has the correct type of microchip.
To begin operation, the cat flap must learn the unique microchip Identication
Number (ID) of your cat. Please follow the steps below to begin the setup of
your cat flap:
1. The cat flap will be factory pre-set in the locked position. Ensure the
manual lock is set to the In and Out position (See Fig. H on page 7).
2. Remove the battery cover, set aside the provided hardware pack, and
install 4 high quality alkaline AA batteries (LR6). The green LED light will
flash three (3) times which indicates that the cat flap is in Automatic Mode.
3. To enter Learn Mode, press and hold the button in the battery
compartment until the red LED light appears (about 5 seconds). You will
have 60 seconds to position the cat’s head in the tunnel to learn the
microchip ID. Once the cat flap has learned the microchip ID, it will unlatch
and the red LED will turn off. The cat flap will stay in Automatic Mode and
will re-latch after 3 seconds.
4. After successfully learning the cat’s microchip ID, you will be ready to
install the cat flap into your door.
Note: To learn more than one cat, please follow the same steps starting with
step No. 3. The microchip cat flap can store up to 40 microchipped cats.
Replace the battery cover when the process is complete for all cats.
Helpful Tip: Program your cats
microchip ID before installation to
prevent having to hold your cat in the
cat flap once it is installed. If you are
having trouble programming your cats
microchip ID, please ensure that their
head is extended into the tunnel with the
microchip cat flap oriented as shown.
You should hear the cat flap unlatch once
it has learned your cats microchip ID.
Note: If your cats head touches the clear flap prior to
unlatching, then the microchip is not located for best use of
this product. Please contact PetSafe® Customer Service for
additional options for operation.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PPA19-16811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PPA19-16811 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info