Manual Petsafe PPA19-16145 (page 3 of 49) (English, German, Dutch, French, Italian, Spanish)

770958

Zoom out

Zoom in

1/49

DEITNL

Accessories available online

Thank you for choosing the PetSafe

Brand. You and your pet deserve a

companionship that includes memorable moments and a shared understanding

together. Our products and training tools enhance the relationship between

pets and their owners. If you have any questions about our products

or training your pet, please visit our website at www.petsafe.com

or contact our Customer Care Centre. For a listing of Customer Care

Centre telephone numbers, visit our website at www.petsafe.com.

Programming Cats into the PetSafe®

Microchip Cat Flap

Your PetSafe® Microchip Cat Flap is designed to work with most 15-digit

microchips (FDX-B) used for pets. Before you begin setup or installation of the

cat ﬂap, please ensure your cat has the correct type of microchip.

To begin operation, the cat ﬂap must learn the unique microchip Identiﬁcation

Number (ID) of your cat. Please follow the steps below to begin the setup of

your cat ﬂap:

1. The cat ﬂap will be factory pre-set in the locked position. Ensure the

manual lock is set to the In and Out position (See Fig. H on page 7).

2. Remove the battery cover, set aside the provided hardware pack, and

install 4 high quality alkaline AA batteries (LR6). The green LED light will

ﬂash three (3) times which indicates that the cat ﬂap is in Automatic Mode.

3. To enter Learn Mode, press and hold the button in the battery

compartment until the red LED light appears (about 5 seconds). You will

have 60 seconds to position the cat’s head in the tunnel to learn the

microchip ID. Once the cat ﬂap has learned the microchip ID, it will unlatch

and the red LED will turn off. The cat ﬂap will stay in Automatic Mode and

will re-latch after 3 seconds.

4. After successfully learning the cat’s microchip ID, you will be ready to

install the cat ﬂap into your door.

Note: To learn more than one cat, please follow the same steps starting with

step No. 3. The microchip cat ﬂap can store up to 40 microchipped cats.

Replace the battery cover when the process is complete for all cats.

Helpful Tip: Program your cat’s

microchip ID before installation to

prevent having to hold your cat in the

cat ﬂap once it is installed. If you are

having trouble programming your cat’s

microchip ID, please ensure that their

head is extended into the tunnel with the

microchip cat ﬂap oriented as shown.

You should hear the cat ﬂap unlatch once

it has learned your cat’s microchip ID.

Note: If your cat’s head touches the clear ﬂap prior to

unlatching, then the microchip is not located for best use of

this product. Please contact PetSafe® Customer Service for

additional options for operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PPA19-16145 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Petsafe PPA19-16145 Manual

Product: