621827

Perel E305W2-G Manual

2
Zoom out
Zoom in
Previous page
1/21
Next page
E305W2 - E305W2-G
V. 01 – 14/07/2015 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Indoor use only.
• Keep the device away from children and unauthorised users.
• Do not connect to an appliance with a load exceeding the capacity of the timer (see Technical
Specifications).
• Do not use a timer to control an appliance containing a heating element (cooking appliance, heater, iron…).
• Never leave the appliance unattended while in use.
• Always make sure the plug of the connected appliance is fully inserted into the timer.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
3. Operation
3.1 Setting the day and time
1. Unplug the timer from the outlet.
2. In Clock mode, press and hold OK for 4 seconds. The weekday flashes.
3. Press button +1 or -1 to select the day of the week and press OK to confirm. The hour digit flashes.
4. Press button +1 or -1 to adjust hour and press OK to confirm. The minute digit flashes.
5. Press button +1 or -1 to adjust the minutes. minute and press OK to confirm.
6. Press MENU to finish. The display shows the newly set time. The hour display is in 24 hour format.
Notes
• To change the hours and minutes more quickly, press and hold +1 or -1 for more than 1 second. The
number will change quickly in ascending or descending order. Then release the button until your desired
number shown.
• If you want to exit the clock setting mode, press MENU.
3.2 Setting a program
1. Unplug the timer from the outlet.
2. To enter PROGRAM mode, press MENU. PROG 1, ON flashes.
PROG 1 shows the program number, ON or OFF shows the program status.
3. Press +1 or –1 to select a program number and a status.
The default program is 1 ON, press +1 to select program 1 OFF, press +1 again to select program 2 ON,
and so on.
4. Press OK. The weekdays are flashing.
5. Press +1 to select a day or set of days.
6. Press OK to confirm. The hour digit flashes.
7. Press +1 or –1 to set the hour and press OK to confirm. The minutes digit flashes.
8. Press OK to confirm. Press MENU twice to exit program mode.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel E305W2-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel E305W2-G in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info