Manual PENTAGRAM Vanquish FM RT P5100 (page 2 of 2) (English)

523523

Zoom out

Zoom in

1/2

Vanquish FM RT can send the playing music to FM radio, so you can enjoy the

music in Vanquish FM RT through FM radio.

• Operations of FM transmission (FM radio on cars e.g.)

1) Open the FM radio of car, turn to the FM frequency in 88MHz ~ 90MHz.

(Please choose the frequency without FM program for better effect.)

2) Connect the earphone or antenna (optional) with Vanquish FM RT. Under

MUSIC menu, hold button to enter transmission status. Under other menu,

press MODE button to enter MAIN MENU, select and enter TRAN menu.

3) Press button to turn Vanquish FM RT to playing/pause status, press +/–

button to adjust the frequency, make it the same as the FM radio of car.

4) Now you can enjoy the music in Vanquish FM RT through the FM radio of car.

5) Please refer to “4.1 MUSIC” for the operations of playing music, except for

the operations of adjust the volume, please adjust the volume through the

stereo set of car.

• Exit FM transmission: HOLD MODE button to exit FM transmission.

Note: The earphone can be used as antenna if you don’t purchase the antenna.

4.3 RECORD

1) Before recording, please refer to “4.5 SET” to set the parameters of recorded

file.

Recorded Mode Source

VOICE (optional)

MIC

2) FM Recording: Press REC button to record in Radio status.

VOICE Recording (optional): Press REC button to record. Vanquish FM RT

can record via MIC, and play the recorded file(s) under VOICE (optional)

menu.

3) Press button to pause/resume recording, and press REC button to end

recording.

4) Vanquish FM RT can rename and save for the recorded file when finish

recording.

Location of Saving Playing Menu

“VOICE” folder under root directory VOICE menu

“FM” folder under root directory MUSIC menu

Note: It does not support A-B repeating during recorded files played.

4.4 FM

Vanquish FM RT can receive and record the FM programs under FM menu.

Press MODE button to switch among “Radio”, “Scan”, “Store” and “Exit” under FM

menu. The Operations are as the following:

1) Radio: You can switch channel by pressing / button, if there is more than

one channel saved. Press +/– button to adjust the volume.

2) Scan: Vanquish FM RT can save maximum 30 channels.

Automatic Scanning: Press button to enter auto-scanning under Scan

status, Vanquish FM RT would save the searched channel in sequence auto-

matically.

Manual Scanning: Press / button to search channel ahead/backwards by

0.1MHz manual in receiving status.

3) Store: Press button to save channel(s), the OLED displays “Station Saved”.

4) Exit: Press button to return to MAIN MENU.

Note: Vanquish FM RT would search and save channel(s) automatically when enter

FM menu for the first time. The earphone can be used as an antenna, connect it

with Vanquish FM RT would make better effect while searching channels.

4.5 SET

• Press / button to select the item, press MODE button to enter.

• Press / button to set the value, press MODE button to confirm and return

to SET menu.

You can set the following items in “SET” menu:

Items Descriptions

There are 6 equalizer modes: NORMAL, ROCK, JAZZ,

CLASSIC, POP, BASS.

PlayMode

There are 6 play modes: NORMAL, REPEAT ONE, REPEAT

ALL, SHUFFLE, SHUF & REPE, INTRO.

Note: Under “INTRO” mode, you can switch to “NORMAL”

mode by pressing

button.

Screen

Saving

Vanquish FM RT would start screen savings if there is no

operation during the time which is set as 5, 10, 20, 30, 40,

50 seconds and ∞. You can press any button to exit the

screen savings. “∞” presents the screen savings isn’t

started.

Power

Set

Vanquish FM RT would power off automatically if there is

no operation in stop status during the time which is set as

DISABLE, 2MINS, 5MINS and 10MINS. “DISABLE” presents

Vanquish FM RT can not power off automatically.

Record

Set

Press / button to select item, and press MODE button

to select value.

Source: To set the source as MIC (optional) or FM . Press

button to enter “Encoder” value.

Encoder: To set the encoder as IMADPCM, MSADPCM or

PCM. Press button to enter “Channel” value.

Channel: To set the channel as Stereo or Mono. Press

button to enter “Sample” value.

Note: The Channel can be only set as “Mono” when

“Source” is set as “MIC”.

Sample: To set the sample as 8000Hz, 11025Hz,

16000Hz, 22050Hz or 32000Hz.

Press button to enter “Exit” value.

Exit: Press MODE button to exit “Record Set” menu.

Language

The display language of menu & lyric: ENGLISH&GBK,

ENGLISH&BIG5, ENGLISH&KOR, ENGLISH&JNP and

ENGLISH&EUR, select EXIT to return to SET menu.

Exit

Select “Exit”, and press MODE button to return to MAIN

MENU.

4.6 DELETE

• Press MODE button to enter, press / button to select where the files you

want to delete are in:

• Music or Voice (optional).

• Press MODE button to enter sub menu, press / button to select “Yes” or

“No”.

• Select “Yes”, and press MODE button to delete, the OLED would display

“SUCCESS”.

• Select “No”, press MODE button to choose the file until last one.

• Select “Exit”, press MODE button to return to sub menu.

4.7 ABOUT

Press MODE button to enter to browse the system information, which includes VER

(version), INT (the capacity of Vanquish FM RT), FREE (the spare capacity). Press

any button (except for button) to exit.

4.8 EXIT

Select “EXIT” in MAIN MENU, and press MODE button to exit MAIN MENU.

5. Others

5.1 Remarks

1. “V***.WAV/F***.WAV” are titles for VOICE (optional) and FM recorded files

in Vanquish FM RT. “*” presents as “0~9”.

2. It is suggested not to delete the system file named as “SETTINGS.DAT” under

root directory of Vanquish FM RT, because it saved the latest settings, other-

wise the settings will be return to original settings when next power on.

5.2 Specifications

* The actual useable capacity may not be identical as labeled.

PENTAGRAM reserves the rights to make changes on any specification without prior

notice.

Items Descriptions

Dimension 78.7mm x 32mm x 17.5mm

Weight 31g approximately

OLED Dichromatic OLED (128 X 64)

Capacity * 128MB ~ 1GB

Power Supply

cal adapter charged for it

Earphone Output

11mW + 11mW,

32ohm

MP3 Bit Rate 8Kbps~320Kbps

MP3, WMA

WMA Bit Rate 32Kbps~192Kbps

Frequency Response 20Hz~20KHz

Stereo Imbalance Degree +-0,5dB

Stereo Separate Degree >80dB

Transmitting Frequency

Range

88MHz~90MHz

FM Transmission

Transmitting Power

<10mW, zasięg

ok. 5m

Radio Frequency Range 76MHz~108MHz

Radio FM

Preservable Stations 30

Files Format MP3, WMA

Working Tem-

perature

-10°C~55°C

Storage and

Transportation

Temperature

-40°C~70°C

Relative Humid-

ity under Work-

ing

20%~98% (40°C)

Relative Humid-

ity under Stor-

age and Trans-

portation

20%~90% (40°C)

Atmospheric

Pressure

86KPa~106KPa

Menu display

Language

English, Simplified Chinese, Traditional Chinese

Computer

IBM PC, Compatible Notebook or Mac with USB

port.

Operating

System

Windows 98/98SE/Me/2000/XP/Server 2003,

Mac OS 10.2 or above, Linux 2.4.2 or above.

5.3 FAQ

If you meet any of the following difficulties in using Vanquish FM RT, use the

following guide for help. Should any problem persist, contact with PENTAGRAM

Customer Service.

Symptoms Possible Reasons

Analysis

Remedy

Fail to power on. Low battery. Charge battery.

Low battery. Charge bartery. Power off shortly

after power on.

HOLD switch locked. Unlock HOLD switch.

The volume is 0. Turn up the volume.

No sound out-

put.

Earphone isn’t

connected well.

Connect earphone

correctly.

Keystroke void. HOLD switch locked.

Unlock the HOLD

switch.

USB Cable isn’t

connected correctly.

Connect USB Cable

correctly. Fail to connect

with the com-

puter.

Driver hasn’t been

installed on Windows

98/98SE.

Install the driver (refer

to “2.2 Utilities Instal-

lation”).

Check the system

settings whether be

accordance with

requirements.

Fail to download.

Format Vanquish FM

RT and try again.

Low battery. Charge battery.

Cannot record.

Space insufficient. Delete some files.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Vanquish FM RT P5100 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PENTAGRAM Vanquish FM RT P5100 Manual

Product: