41
5 Installation
5.2 Mounting the cooker hood
Remove the grease filter. •
Make a hole in the mounting panel: •
680 x 371 mm.
Take care that there is at least 60 mm
of material around the hole in order
to avoid any damage during the
following installation.
Adjust the position of the lateral •
springs making attention of the
thickness of the material you are
using to fix the unit.
Insert the unit from below (see fig. A). •
The springs, previously adjusted, are
strong enough to keep the product
fixed for a while.
Insert the four blocking levers into the •
holes (see fig. B).
Fix the blocking levers using the screws •
(see fig. C).
Attention! Do not tighten the screws
too much otherwise the planarity of the
frame could be compromised.
Mount the grease filter again. •
