74365
145
Zoom out
Zoom in
Previous page
1/147
Next page
1
Building in
1. Check if the kitchen cabinet and the cut out are in accordance with the
instructions (see 'safety' and 'building in dimensions').
2. Remove the protective foil of the sealing strip (A) and attach the sealing strip
in the groove of the aluminium profiles or the edge of the glass plate. Do not
attach the sealing strip through the corner. Instead, cut 4 pieces that fit
tightly together in the corners.
3. If the woodtop is made of treated wood, then coat the sawn surfaces of the
top with sealing varnish, to prevent moisture causing the top to swell.
4. Turn the appliance over and put it in the cutout.
5. Connect the appliance to the electricity supply. The displays will illuminate.
The displays will extinguish after a short time.
6. Check its operation. If the appliance has been connected incorrectly, it will
emit a beep signal or the displays will not illuminate.
7. Hand over the instructions to your customer.
Immediately after switching on the fan will start. The appliance will now carry
out a self-check for a few seconds.
144
installation
A
700001871100_IDK835_4t.qxd 12-10-2005 12:47 Pagina 144
145


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK 835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK 835 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info