71735

Pelgrim IDK 641 Manual

52
Zoom out
Zoom in
Previous page
1/54
Next page
INSTALLATION
Building in
Cut opening in worktop
Saw the opening in the worktop. This should
be done very accurately (see table).
Also saw out any partitions that may be
present.
The distance from the saw line to the rear
wall and/or side wall is indicated in the table.
Table:
Space to be left free around the appliance:
min. 600 mm
min. 900 mm (IDK826)
min. 650 mm
min. 450 mm
min. 40 mm
cooker hood
cabinet
side wall
hob
min. 40 mm
604/774
522
61
48
560/750
490
min.50
61
48
Type of hob IDK641 IDK826
Appliance width x depth
604 x 522 mm 774 x 522 mm
Installation height from top of worktop
48 / 61 mm 48 / 61 mm
Cut out dimensions width x depth
560 x 490 mm 750 x 490 mm
Distance from saw line to rear wall
50 mm minimum 50 mm minimum
Distance from appliance to side wall
40 mm minimum 40 mm minimum
3 phase connection
3 positive without negative 3 a.c. 230 V
Remove the connection between the grey and
the black wire.
The fuse box in your home must be fitted with
a 16 A fuse.
positive connection L1 (grey)
positive connection L2 (black)
positive connection L3 (blue and brown)
Safety prescriptions
For the appliance to work well, it is important:
n That there is sufficient ventilation to allow
the hob to cool down, in accordance with
the possibilities specified in this chapter.
n The ventilation air drawn in by the hob
must not be warmer than 65 °C. Bear this in
mind if the oven is to be built in under the
hob.
n That the connecting cable hangs freely and
is not caught by a drawer.
n The worktop is flat.
102
103
INSTALLATION
blue
brown
grey
black
yellow/green
L3 L2 L1
230V
230V
230V
… 52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK 641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK 641 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info