71713
37
Zoom out
Zoom in
Previous page
1/42
Next page
73
faults
Table
If the appliance does not work properly, it does not always mean that it is
defective. Try to deal with the problem yourself first. Phone the service
department if the advice given below does not help. Only authorised personnel
may carry out work on the gas and electrical part.
Fault
There is a smell of gas in the
vicinity of the appliance.
A burner does not ignite.
Cause
- A burner is turned on but not
lit.
- The coupling on a bottled
gas unit has come undone.
- Burner parts not correctly
installed.
- Fuse defective/fuse in meter
cabinet switched off.
- Plug not in socket.
- Sparkplug dirty/damp.
- Burner parts dirty/damp.
- Ventilation opening at the
rear closed.
- Main gas tap closed.
- Fault in the gas network.
- Gas bottle or tank is empty.
- Control knob not kept
pressed in long enough or far
enough.
Solution
- Close the tap and wait for a
few minutes before
relighting.
- Tighten the coupling.
- Assemble the burner parts
using the centring ridges and
ensure that they fit properly
together.
- Fit a new fuse or switch the
automatic fuse back on.
- Push the plug into the
socket.
- Clean and dry the sparkplug.
- Clean and dry the burner
parts, making sure that the
outflow holes are open.
- Ensure adequate air supply.
- Open the main gas tap.
- Check with your gas supplier.
- Connect a new gas bottle or
have the tank filled.
- Keep the control knob
pressed in far enough
between full and low.
maintenance
72
Stubborn stains on stainless steel (spillage wells)
In particular boiled over red cabbage, red beetroot, soysauce, rhubarb and
other foodstuffs with a high sugar content and acidic liquids can cause
discoloration of the surface.
If you want to remove stubborn stains from stainless steel, you can best use a
cleaning agent specially formulated for stainless steel. In that case, always clean
in the direction of the structure of the steel in order to avoid shiny spots.
(Damage resulting from this are not covered by the warranty!)
If the stains cannot be removed using the method described above, you can
clean the hob with HG oven and grill cleaner. Bear in mind, however, that you
will have to clean the whole of the spillage well in order to avoid differences in
'colour'. You must also treat the spillage well afterwards with a polish or
maintenance product for stainless steel. It is normal for the surface to discolour
somewhat during the product's lifetime.
Keradur
®
burner bases
The burner bases have a unique Keradur
®
surface coating. The special dirt-
repelling lacquer has a ceramic filling which makes cleaning easier and
substantially improves the durability of the burners. The burner bases are best
cleaned with a mild cleaning product and a soft cloth.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GKV 107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GKV 107 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info