75718
28
Zoom out
Zoom in
Previous page
1/30
Next page
55
installation instructions
Gasconnection RC 1/2˝ (ISO 7/1-RC 1/2)
Please note:
The type of gas and the country for which the appliance has been designed are
indicated on the ratings plate.
The gas connection must comply with national and local regulations.
Amongst other things these regulations instruct that:
only approved materials are to be used;
– only a completely metal hose may be used behind a built-in oven and beneath
the hob.
We recommend that the hob be connected by means of a fixed pipe.
Connection using a specially designed safety hose is also permitted. In all
cases the connection tap for the appliance must be positioned such that it is
easily accessible, in an adjacent kitchen cupboard, for example.
The safety hose must not get kinks in it or get trapped and must not come
into contact with moving parts of the kitchen furniture.
Before using the appliance for the first time check the connections using
water and washing-up liquid to ensure that there are no gas leaks.
54
installation instructions
General
The fitting of the appliance should only be carried out by a registered Corgi
gas fitter.
Please note:
This appliance is not connected to a flue duct. Take care to ensure that there
is sufficient ventilation.
Do not install a hob next to a high cupboard or wall made of flammable
material. (If there is no alternative, ensure that there is a minimal distance of
100 mm between the outer edge of the hob and the wall in question.
Also ensure that there is a minimum distance of 650 mm between the hob
and any overhead extractor fan which may be installed.)
Electrical connection (solely for appliances with a
spark switch)
Electrical connection: 230 V - 50 Hz.
This appliance complies the regulations concerning electromagnetic
compatibility in directive 89/336/EEC.
The electrical connection must comply with national and local regulations.
Wall socket and plug must be accessible at all times.
If you want to make a fixed connection, ensure that a multi-pole switch with a
distance between contacts of 3 mm is installed in the supply cable.
Please note:
This appliance must be earthed.
If the connection cable becomes damaged, it should be replaced by the
manufacturer’s service department or by a person with equivalent
qualifications, in order to prevent dangerous situations from arising.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GKB 417 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GKB 417 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info